Home |
Search |
Today's Posts |
#30
|
|||
|
|||
Hard starting Briggs & Stratton 3.0 hp lawnmower engine
I got a new diaphragm, but looking at the old diaphragm, it looks to
be intact and in good shape. The material still seems pliable, I held it up to a light and can't find any breaks in it, including where the choke plate rod is attached. The longer of the two pickup tubes had a fair amount of crud on the screen, which I've cleaned off. Gonna put it back together with the old diaphragm and see if it starts any easier with that pickup cleaned off. If it does, I'll store the new diaphragm in the refrigerator for future use. And why are there two pickup tubes and why are they different lengths? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
5.5 HP Briggs & Stratton Mower Engine Soaks Air Filter with Gas When Running | Lawns | |||
starting a briggs + stratton choke engine | United Kingdom | |||
Briggs & Stratton 16 HP engine-points actuating rod not moving enough ? | Lawns | |||
Briggs & Stratton Replacement Engines vs rebuilding existing engine | Lawns | |||
FS: 11 hp Briggs & Stratton engine - SOLD | North Carolina |