|
using an angle-grinder to cut down live Leylandii
In article , Jon Green
writes "dave @ stejonda" wrote: Now, can anyone suggest what I might do to the things tonight to stop them re-sprouting please - something which won't spread through the soil. A leylandii-hating cynic might think, "Hammer copper nails through the trunks, wait for them to peg out, then chop 'em off at ground level." Hello Jon :) Long time no see !!!!!!! -- Jane Ransom in Lancaster. I won't respond to private emails that are on topic for urg but if you need to email me for any other reason, put jandg dot demon dot co dot uk where you see deadspam.com |
using an angle-grinder to cut down live Leylandii
In message , david
writes If you've cut them hard back then the chances of them re sprouting is almost non existent. goodygoodygoody :) -- dave @ stejonda |
using an angle-grinder to cut down live Leylandii
In message , Jon Green
writes "dave @ stejonda" wrote: Now, can anyone suggest what I might do to the things tonight to stop them re-sprouting please - something which won't spread through the soil. A leylandii-hating cynic might think, "Hammer copper nails through the trunks, wait for them to peg out, then chop 'em off at ground level." I like the idea of being sure. What size copper nails do I need to head out & buy for a surreptitious hammering session this afternoon? -- dave @ stejonda calculate your ecological footprint http://www.lead.org/leadnet/footprint/ |
using an angle-grinder to cut down live Leylandii
"dave @ stejonda" muttered something
incoherent along the lines of: I have an urgent need to decrease to ~7ft a line of Leylandii along one edge of my garden. Using a handsaw is good for me but takes too long. I am not prepared to spend money on a chainsaw for this single use. What would be the issues in using an angle-grinder? The sap is obviously relatively viscous and non-seepy at the moment so I wouldn't expect catching from that to be a problem. The maximum trunk diameter is probably 3". What do folks think? Paging Steve Auvache! (x-posted to ukrm for the Anglegrinder-o-philes there) -- MrMoosehead | I'm just an away team member in a red shirt... CBR600f MRO#28 BONY#4 | nice word: *** renascence *** Remove Your Brain To Reply.|www.thehallfamily.net/kady/adrian/ Current MooseMusic 671. Def Leppard - Etcetera - 09 - Now I'm Here (Live, With Brian May |
using an angle-grinder to cut down live Leylandii
On Wed, 20 Nov 2002 10:26:43 +0000, MrMoosehead
wrote: "dave @ stejonda" muttered something incoherent along the lines of: I have an urgent need to decrease to ~7ft a line of Leylandii along one edge of my garden. Using a handsaw is good for me but takes too long. I am not prepared to spend money on a chainsaw for this single use. What would be the issues in using an angle-grinder? The sap is obviously relatively viscous and non-seepy at the moment so I wouldn't expect catching from that to be a problem. The maximum trunk diameter is probably 3". What do folks think? Paging Steve Auvache! (x-posted to ukrm for the Anglegrinder-o-philes there) Hmmm., well I'd use the chainsaw, of course, but I guess an angle grinder would work fine. I don't imagine there'd be any particular safety issues, other than making sure the tree didn't fall on the user. Only problem being that 3" is deeper than the max cutting depth of many of them (well, mines a 115mm? disc with a max cut of about 1.5" - not sure what size the larger ones are) so he may have to cut all the way round, IYSWIM. -- Ace in Alsace - bruce dot rogers at roche dot com 955i Sprint ST - For Sale CB400F2, V70 XC & assorted pushbikes BOTAFOT#3, SbS#2, UKRMMA#13, UKRMSPC#1, DFV#8 The UKRM FAQ: http://www.ukrm.net/faq/ukrmfaq1.html |
using an angle-grinder to cut down live Leylandii
Jane Ransom wrote:
Hello Jon :) Long time no see !!!!!!! Hi Jane! I've been lurking, but only occasionally; having worked myself witless at work (first reason for newsgroup cut-down), I got laid off earlier this month, so I've been working myself witless trying to find something new (second reason). So it goes. Still, until I've a new job, I've a little more time on my hands. Well, until the baby arrives in a few weeks.... Jon -- SPAM BLOCK IN USE! Replace 'deadspam' with 'green-lines' to reply in email. Want a free solution to email spam? Try http://www.deadspam.com/ (Declaration of interest: I own/run the domain.) |
using an angle-grinder to cut down live Leylandii
In article Victoria Clare writes: | (Nick Maclaren) wrote in | : | | ObPedant: except for the coast redwood and Cretan cypress, which do. | I don't know of any others that do reliably, but I have seen the odd | sprout from old wood on my Korean fir and a few others. Yews are not | conifers, of course. | | I have one to add to your list, Nick - my Chamaecyparis pisifera | 'Boulevard' got horribly abused while I was moving house and no-one | remembered to water it. It just had a tuft of green left on top and looked | very sad, - but is coming back beautifully now. Interesting. I wonder how many species there are? Regards, Nick Maclaren, University of Cambridge Computing Service, New Museums Site, Pembroke Street, Cambridge CB2 3QH, England. Email: Tel.: +44 1223 334761 Fax: +44 1223 334679 |
using an angle-grinder to cut down live Leylandii
"dave @ stejonda" wrote:
I like the idea of being sure. What size copper nails do I need to head out & buy for a surreptitious hammering session this afternoon? Heh-heh! Dunno; I guess any size that's pure copper. You'd want to have nail-heads small enough that they don't show, I s'pose, and bang enough of them in to be sure. It's probably considerate not to nail them in at a height that's likely to be attacked by chainsaws, though: if the chainsaw blade hits metal, it could cause injury to the chainsaw operator, although copper's softer than steel, of course. Not that I'd suggest doing this to someone else's leylandii, of course. Strictly to nobble your own trees.... Jon -- SPAM BLOCK IN USE! Replace 'deadspam' with 'green-lines' to reply in email. Want a free solution to email spam? Try http://www.deadspam.com/ (Declaration of interest: I own/run the domain.) |
using an angle-grinder to cut down live Leylandii
"MrMoosehead" wrote in message
... "dave @ stejonda" muttered something incoherent along the lines of: I have an urgent need to decrease to ~7ft a line of Leylandii along one edge of my garden. Using a handsaw is good for me but takes too long. I am not prepared to spend money on a chainsaw for this single use. What would be the issues in using an angle-grinder? The sap is obviously relatively viscous and non-seepy at the moment so I wouldn't expect catching from that to be a problem. The maximum trunk diameter is probably 3". What do folks think? The heat generated by the high speed of the cutter would harden the juices and cause the blade to stick. -- Alan GSX-R1000 , Triumph Thunderbird, ZXR750L2 Racer. TGF, UKRMFBC#7, Two#24, BOTAFOF#11, YTC#9, GYASB#1. SbS#23. DFWAG#2, DS#2, DIAABTCOD#20. NOPSPAM in the reply http://sportsbike.org (our own endurance team) http://Team-ukrm.com "Nemo repente fuit tur****imus" |
using an angle-grinder to cut down live Leylandii
'Twas Wed, 20 Nov 2002 10:47:43 +0000, when Victoria Clare
enriched all our lives with these worthy thoughts: I have one to add to your list, Nick - my Chamaecyparis pisifera 'Boulevard' got horribly abused while I was moving house and no-one remembered to water it. It just had a tuft of green left on top and looked very sad, - but is coming back beautifully now. Which pleases me because I've had it about 15 years now, and it's almost 4 feet tall (if rather taller and thinner than it should be). Dead easy to do cuttings - I'm on my 4th generation this autumn : cuttings of a cutting of a cutting of the original C.p.Boulevard I bought in '91. The 1 or 2 yr old specimens are great in winter baskets or tubs. -- cormaic URG faqs/webring - www.tmac.clara.co.uk/urgring/ Culcheth Garden - www.tmac.clara.co.uk/garden/ Warrington Paving - www.pavingexpert.com/ Peoples' Republic of South Lancashire cormaic CAN BE FOUND AT borlochshall.co.uk |
using an angle-grinder to cut down live Leylandii
"Alan T Gower" wrote in message
. .. "MrMoosehead" wrote in message ... "dave @ stejonda" muttered something incoherent along the lines of: I have an urgent need to decrease to ~7ft a line of Leylandii along one edge of my garden. Using a handsaw is good for me but takes too long. I am not prepared to spend money on a chainsaw for this single use. What would be the issues in using an angle-grinder? The sap is obviously relatively viscous and non-seepy at the moment so I wouldn't expect catching from that to be a problem. The maximum trunk diameter is probably 3". What do folks think? The heat generated by the high speed of the cutter would harden the juices and cause the blade to stick. There are two options. 1. Go to a hire shop and hire a chain saw and do it yourself. 2. Have a word with a local farmer and get him to do it with a tractor. Myself I use option 2. It only cost £10 to do about 240 feet hedge. -- John Riding a Honda CBR 600 FN |
using an angle-grinder to cut down live Leylandii
On Wed, 20 Nov 2002 10:26:43 +0000, MrMoosehead
wrote: "dave @ stejonda" muttered something incoherent along the lines of: I have an urgent need to decrease to ~7ft a line of Leylandii along one edge of my garden. Using a handsaw is good for me but takes too long. I am not prepared to spend money on a chainsaw for this single use. What would be the issues in using an angle-grinder? The sap is obviously relatively viscous and non-seepy at the moment so I wouldn't expect catching from that to be a problem. The maximum trunk diameter is probably 3". What do folks think? Paging Steve Auvache! 9" angle grinder but make sure you use cutting discs rather than grinding discs. Personally I'd burn the bloody things but it's not my choice :-( -- Andy Bonwick ZX9RE1 BOTAFOT#22,BONY#22,MRO#22,IBW#12,UKRMFBC#6, chi#2 |
using an angle-grinder to cut down live Leylandii
MrMoosehead wrote:
"dave @ stejonda" muttered something incoherent along the lines of: I have an urgent need to decrease to ~7ft a line of Leylandii along one edge of my garden. Using a handsaw is good for me but takes too long. I am not prepared to spend money on a chainsaw for this single use. What would be the issues in using an angle-grinder? The sap is obviously relatively viscous and non-seepy at the moment so I wouldn't expect catching from that to be a problem. The maximum trunk diameter is probably 3". What do folks think? Paging Steve Auvache! IIRC you can get a "chainsaw" disc for angle grinders - possibly from Machine Mart. -- Platypus VN800 Drifter Ain't no drag R80RT Papa's got a brand new bag DIAABTCOD#2 GPOTHUF#19 BOTAFOS#6 BOTAFOT#89 BOB#1 SBS#35 "I didn't have quite enough money to get everything I wanted." |
using an angle-grinder to cut down live Leylandii
In message , Jon Green
writes "dave @ stejonda" wrote: I like the idea of being sure. What size copper nails do I need to head out & buy for a surreptitious hammering session this afternoon? Heh-heh! Dunno; I guess any size that's pure copper. ....and they, I discovered, are not so easy to find - especially with tiny heads. You'd want to have nail-heads small enough that they don't show, I s'pose, and bang enough of them in to be sure. It's probably considerate not to nail them in at a height that's likely to be attacked by chainsaws, though: if the chainsaw blade hits metal, it could cause injury to the chainsaw operator, although copper's softer than steel, of course. I've just returned from a successful foray out this morning to bang the nails in. Decided to do it before the workman (who seem to be ripping the insides out of next door) arrive. Quite an interesting experience that - creeping around at 0430 in the pouring rain banging copper nails in trees - made me think of banging stakes into the hearts of vampires g - this episode has brought a new aspect to my gardening life! I decided, since I could only find Copper 'Clout' nails which have quite large heads to go the easy route of banging them in around the perimeter of the tops of the severed larger trunks. So I've made no attempt to hide the evidence to anyone who's 8ft tall and looking. I just really didn't fancy trying to fight my way through the thick lower growth to find the trunks lower down. Hell, I'm surprised no-one called the police, me sneaking around with my ladder in the dark. Not that I'd suggest doing this to someone else's leylandii, of course. Strictly to nobble your own trees.... Of course g. Well at the moment I'd argue they're nobody's trees - I'm quite sure the land owner wouldn't want them if given the choice. Thanks for all your help folks. Now, can anyone tell me *why* copper nails are going to work? -- dave @ stejonda calculate your ecological footprint http://www.lead.org/leadnet/footprint/ |
| All times are GMT +1. The time now is 02:25 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
GardenBanter