Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #16   Report Post  
Old 11-07-2003, 11:31 PM
Vic
 
Posts: n/a
Default Gas line trimmers - need opinions.

I have/had a Ryobi 775r (accepts attachments) and the thing bumped the
line fine. However, since it sat in my mom's garage for so long, the
carb leaks. But it runs with some coaxing.

I went to HD and saw the John Deere recertified trimmers they had for
$69. Looking at it, they are the same as the Homelite in looks, only
green. The JD has a 1hp engine, and the Homelite one most similar to
it was $170 and its also a straight shaft.

I looked at the JD website, and the model I got (comes with the
trimmer and the brush cutter metal blade) lists MSRP as $189. It can
accept attachments also.

Its much more powerful I think than the Ryobi, starts easily every
single time, and is quieter than the Ryobi. My neighbor went out and
bought one himself, although he didn't see the brushcutter model I had
and just got the plain trimmer model for the same price (everything
else was the same).

I've used my other neighbor's edger attachment (he has a Toro) and it
works fine, better if used walking backwards, but since I got used to
edging with the trimmer (twist the lower portion and go), I prefer the
clean cut of the trimmer string. Gives it a cleaner, more pronounced
edge to the grass.

I've known a person that uses the blower attachment (retail $45) and
likes it. I got the Wallyworld Weed Eater el cheapy for my birthday so
I'm not needing that attachment.

the .095 string is also very tough. I'm bumping it MUCH less than the
..080 of the Ryobi.

Some folks would b hesitant t get the refurbished JD, but at least i
know its working now (I could have gotten a lemon with a "new" trimmer
that wasn't refurbished) and it still has the full warranty. Came with
the sholder strap too.

all in all, if you want a nice trimmer, you might want to consider the
JD ones at Home Depot.
  #17   Report Post  
Old 12-07-2003, 03:56 AM
Tono
 
Posts: n/a
Default Gas line trimmers - need opinions.

Vic wrote:



Some folks would b hesitant t get the refurbished JD, but at least i
know its working now (I could have gotten a lemon with a "new" trimmer
that wasn't refurbished) and it still has the full warranty.



Refurbished is sometimes better than new. The serviceman tweaks
adjustments better than the mass produced new ones. A few years ago at
sears they had some reburbished stuff they wanted to get rid of ASAP.
Now I don't usually believe craftsman (crapsman) is the best for any
tool, but the price was right, they were outside on a rack, and each had
just enough gas for me to start them. (picture a guy with a running
chain saw in a sears parking lot!) Oh yes, it was a trimmer for $50 and
a chain saw for $50, both with full warranty. Both of them start first
or second pull, every time, hot or cold (and as for the chain saw, that
also means when it is well below freezing). The trimmer bump works
fine. Someone MUST have made it for sears and they just stick their
name on them.

Tono

  #18   Report Post  
Old 12-07-2003, 09:08 AM
Jan Flora
 
Posts: n/a
Default Gas line trimmers - need opinions.

In article , Tono wrote:

Vic wrote:



Some folks would b hesitant t get the refurbished JD, but at least i
know its working now (I could have gotten a lemon with a "new" trimmer
that wasn't refurbished) and it still has the full warranty.



Refurbished is sometimes better than new. The serviceman tweaks
adjustments better than the mass produced new ones. A few years ago at
sears they had some reburbished stuff they wanted to get rid of ASAP.
Now I don't usually believe craftsman (crapsman) is the best for any
tool, but the price was right, they were outside on a rack, and each had
just enough gas for me to start them. (picture a guy with a running
chain saw in a sears parking lot!) Oh yes, it was a trimmer for $50 and
a chain saw for $50, both with full warranty. Both of them start first
or second pull, every time, hot or cold (and as for the chain saw, that
also means when it is well below freezing). The trimmer bump works
fine. Someone MUST have made it for sears and they just stick their
name on them.

Tono


Sears has always bought other brands and stuck their name on the stuff.
The Sears brand typewriters were Smith-Corona's.
  #19   Report Post  
Old 14-07-2003, 01:12 PM
Paul R.
 
Posts: n/a
Default Gas line trimmers - need opinions.

Thanks for the suggestions.

I ended up going with the Troy-Bilt from Lowes. At $164, it looked to be
the best combination of price and quality for me.

Only putting about 10 hours per year on the trimmer, an Echo seemed a bit
much for my uses. Although I'm sure the quality is there, at more than $100
more than the Troy-Bilt, I just couldn't justify the cost.

I used it this weekend, and it's noticeably superior to my Craftsman,
although it was noticeably louder, and a little heavier.

Thanks again,

--


Paul R.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding Small Amount of Gas with 2 Cyle Oil Mix to Gas for Lawnmower [email protected] Lawns 7 03-06-2013 01:43 AM
Question about Gas Engine Trimmers John McDougald Gardening 3 11-08-2005 01:35 AM
Best Gas-powered String Trimmers evolutionman 2004 Lawns 4 24-06-2004 02:08 PM
Line Trimmer opinions Glenn Gardening 2 01-04-2004 06:47 PM
Gas Powered Hedge Trimmers for Pruning Azalea? Roy Gardening 2 17-10-2003 03:02 PM


All times are GMT +1. The time now is 12:18 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 GardenBanter.co.uk.
The comments are property of their posters.
 

About Us

"It's about Gardening"

 

Copyright © 2017