I cannot find instructions on how to remove the casing but i have all the
Torx screws out of it and it seems like the clutch is the only thing to
remove. The problem i have is that i pulled the zip cord and it stayed and
never went back in. So im trying to avoid going to Home Depot and having
them send it out and costing me $35.00.

Any suggestions would be great or copy of a manual for this model.

Mark

How much did it cost and how long have you had it? Less than 90 days and
under $100.00 they should replace it for you.. Check the return policy with
the retailer before buying power equipment at HD or Lowes. You will need
your receipt.


wrote in message
...
i think there is a screw in the center of the clutch drum, where the
cable goes in.

http://www.minibite.com/america/malone.htm

Dump it and put the money into a STIHL that will last.
JD
"M K" wrote in message
hlink.net...
I cannot find instructions on how to remove the casing but i have all the
Torx screws out of it and it seems like the clutch is the only thing to
remove. The problem i have is that i pulled the zip cord and it stayed and
never went back in. So im trying to avoid going to Home Depot and having
them send it out and costing me $35.00.

Any suggestions would be great or copy of a manual for this model.

Mark