Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
I just put a piece of galvanized sheet metal on the roof about 3
shingles op from the edge of the roof. I bent a 2" wide 90 degree in a 6" wide piece of metal 4 feet long. slid it under the shingles, no nails. I used some clear silicone to hold it in place. When we replaced the roof years later, we had gutters installed. Stretch |
#2
|
|||
|
|||
(from the original post) I don't want to cut a piece of tin and stick it up there................................... .. ---------------------------------------------------------- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Rain, Rain, Rain | United Kingdom | |||
Rain, Rain, Rain | United Kingdom | |||
Rain, Rain, Rain | United Kingdom | |||
Rainwater Diverters For Cast Iron Downpipes | United Kingdom | |||
Rain...Rain....Rain | United Kingdom |