Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
I'm thinking of trying the wax gaskets they actually use with the toilet
flanges... idea is to make the hole large enough to just accomodate the end opening, and have the large part of the flage inside the rubbermaid... and have one of the wax toiulet gaskets between the flange and the rubbermaid wall.. with compression, the wax should seal the opening, it's VERY sticky, so should grip the rubbermaid, and since there will always be water on them, the temperatures should keep them cool. they are somewhat temperature tolerant, I believe, and since they are wax, there shouldn;t be any chemicals to leech out into the pond water. Seems like a cheap and simple solution, after trying quite a number of glue/gasket solutions. If it works, I'll have discovered a neat cheap trick.. if not, I'm no worst off. -- Gareee (Gary Tabar Jr.) |
#2
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
Clever. My only concerns would be heat melting it (sun) or it
hardening up and being moved somehow in the depth of winter. Jim |
#3
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
In article .com,
Phyllis and Jim wrote: Clever. My only concerns would be heat melting it (sun) or it hardening up and being moved somehow in the depth of winter. Jim Aquarium silicone sealer will handle all temps, always be watertight and is safe for fish. It's also inexpensive. -- To reply by email, remove the word "space" |
#4
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
The compression would have to be steadily compressed once it is
hardened. It won't bond to the plastic. That is why we went for EDPM and a tar-like sealer. It can stretch if there is any flex in the can. Steady pressure on the silicone would work as well, as long as it did not get moved. Jim |
#5
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
"Phyllis and Jim" wrote in message
ups.com... The compression would have to be steadily compressed once it is hardened. It won't bond to the plastic. That is why we went for EDPM and a tar-like sealer. It can stretch if there is any flex in the can. Steady pressure on the silicone would work as well, as long as it did not get moved. So aquarium glue will not bond to the rubbermaid then? The fitting won't be moved much, but the Rubbermaid does stretch with the water weight, and since it is a fitting to an external line, I'm sure there will be some simple occasional stress from cleaning the pond, hooking things up, and detaching them, and storing the uv filter for winter. I could use shoo goo (by the Goop people, and put a very generous amount on both the interior and exterior. another thought, was to put it first on the pvc pipe itself, so there's already a rubber "gasket" around it, and then use it ac I described above.. I'd think the goop then would bond well to itself. Still considering options before pulling the filler out, and redoing that. -- Gareee (Gary Tabar Jr.) |
#6
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
In article ,
"Gareee©" wrote: "Phyllis and Jim" wrote in message ups.com... The compression would have to be steadily compressed once it is hardened. It won't bond to the plastic. That is why we went for EDPM and a tar-like sealer. It can stretch if there is any flex in the can. Steady pressure on the silicone would work as well, as long as it did not get moved. So aquarium glue will not bond to the rubbermaid then? Besides making sure the surface is clean and free of any grease, You could also roughen the rubbermaid maid surface with sandpaper around where you want the seal, just to give it a little "tooth". The fitting won't be moved much, but the Rubbermaid does stretch with the water weight, and since it is a fitting to an external line, I'm sure there will be some simple occasional stress from cleaning the pond, hooking things up, and detaching them, and storing the uv filter for winter. I could use shoo goo (by the Goop people, and put a very generous amount on both the interior and exterior. another thought, was to put it first on the pvc pipe itself, so there's already a rubber "gasket" around it, and then use it ac I described above.. I'd think the goop then would bond well to itself. Shoe Goo might work also. I've only used it on shoes, though. Still considering options before pulling the filler out, and redoing that. -- To reply by email, remove the word "space" |
#7
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
The silicone would work fine, like a gasket, if it has compression.
With plastic flex, it is likely to come loose from its bond. Jim |
#8
|
|||
|
|||
Rubbermaid glue report: Forget Gorilla Glue
On Mon, 28 May 2007 14:16:18 CST, "Gareee©"
wrote: I could use shoo goo (by the Goop people, and put a very generous amount on both the interior and exterior. another thought, was to put it first on the pvc pipe itself, so there's already a rubber "gasket" around it, and then use it ac I described above.. I'd think the goop then would bond well to itself. DS said he roughed up the surface of the Rubbermaid before applying. ~ jan ------------ Zone 7a, SE Washington State Ponds: www.jjspond.us |
Reply |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|
Similar Threads | ||||
Thread | Forum | |||
Forget Anti-Freeze; Forget D-Con; Try Fly Bait | Gardening | |||
Rubbermaid glue report: Forget Gorilla Glue | Ponds | |||
Ok, forget hot melt glue and rubbermaid... | Ponds (moderated) | |||
DUMBASSES for sure in the RPM group duh! Rubbermaid glue report: Forget Gorilla Glue | Ponds | |||
Rubbermaid stock tank drain plug size? | Ponds |