"Gareee©" wrote in message
...
"cat daddy" wrote in message
...

There were many great replies, both for experiences with adhesives as
well
as sources of info for bulkhead fittings.

Yes, and from the replies, I never got any confirmation abotu any adhesive
really working on rubbermaid containers

And, valuable information to pass along in the future. Nothing easily
available will bond most Rubbermaid plastics. Specifically to the wheels on
their lawn carts, Only 3M™ Scotch-Weld™ Structural Plastic Adhesive DP-8005
will do, and it's not available to the consumer.
http://www.plasticsmag.com/ta.asp?aid=3080
So, you're back to bulkhead fittings and you should have enough info to
build your own from parts at Lowes, order any of the choices online, from
say the store in jan's link, or discover that the wax ring experiment works
or doesn't work.

Again, there were several great sites posted, both with DIY info, and
commercial parts ordering sites, but both you and Garee apparently
missed
all of them.

No, I did see them, and visited them,.. and they were posted about 2 weeks
after the original thread was started.

There was no indication of that from your posts, and Derek kept saying
that no links were being posted, when they were. The failed adhesives
discussion delayed getting to the heart of your problem. Good luck,
anyway....

cat daddy wrote:

There was no indication of that from your posts, and Derek kept saying
that no links were being posted, when they were.

No, I didn't say anything like that. Garee pointed out that he hasn't seen
any websites that list part numbers for building a filter. I said I've
seen some, but I have no current links, and would really like to find such
links. Nothing in this thread has changed that.
--
derek
- Unless otherwise noted, I speak for myself, not rec.ponds.moderated
moderators.