Home |
Search |
Today's Posts |
#31
|
|||
|
|||
[IBC] Ciment Fondu
Folks,
Since there seemed to be a bit of interest in making ciment fondue slabs I posted some pics on the main gallery of slabs/mountains/scoops I made several years ago along with some tried&true methods ( which I covered well in my previous post). These were all made with LeFarge Ciment Fondue mix. They are VERY sturdy. If you are thinking about giving it a try take a look at some of the types of things I used to make and sell. Now....I've moved on to ceramics :) Regards, Dale Cochoy, Wild Things Bonsai Studio, Hartville, Ohio http://www.WildThingsBonsai.Com Specializing in power wood carving tools. Yakimono no Kokoro bonsai pottery of hand-built stoneware LaFarge Ciment Fondue should be allowed to slowly cure to avoid cracking and thereby ensure the slab's ability to endure extreme heat and cold. I recommend spraying the slab during the first day of curing. ************************************************** ****************************** ++++Sponsored, in part, by Marc Zimmerman++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#33
|
|||
|
|||
[IBC] Ciment Fondu
I sent an e-mail looking for distributers in eastern US and got a reply.
Any one willing to buy a Pallet of this stuff and act as a distributer. Here is the reply: What quantity are you looking for? We ship most Fondu directly from our plant in VA in minimum pallet quantities. Charles Alt Alt/LCA/Us/Aluminates/Lafarge@Aluminates cc: Subject: US Distributers Doug Taylor ----- Original Message ----- From: "Michael Persiano" To: Sent: Friday, February 20, 2004 4:09 PM Subject: [IBC] Ciment Fondu In a message dated 2/20/2004 2:55:29 PM Eastern Standard Time, writes: Back to the original question, does anyone know where to get LaFarge Ciment Fondue ? I will dig it up. I wrote an extensive article in BT many years ago on a slab project. I will identify the number for those who have interest, and I will also provide additional details of other essential ingredients for the slabs. Cordially, Michael Persiano members.aol.com/iasnob/index.html ************************************************** ************************** **** ++++Sponsored, in part, by Marc Zimmerman++++ ************************************************** ************************** **** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#34
|
|||
|
|||
[IBC] Ciment Fondu
Hi Doug.
You write RE' Ciment Fondue manufacturer irep' in Virginia: We ship most Fondu directly from our plant in VA in minimum pallet quantities. This stuff is also made & used in Canada: http://www.lafargecorp.com/cmtp cfd.htm Here's the Virginia site for data, which notes the smallest packaging is 94 pound bags: http://www.lcainc.com/fondu.html .... & on Secar products, that someone mentioned: http://www.lcainc.com/product.html My club (in Richmond VA) purchased it with help from local bonsai enthusiasts in Chesapeake VA (admittedly several years ago) & picked-up the bags we needed. The Ciment Fondue is HEAVY, of course, and latex molds are very expensive to make even you already have a good stone as a mold. If you can borrow molds (we did), it is a godsend. Bonsai vendors can't assume there is a market for ciment fondue because the molds are REALLY expensive to make. Vendors also realize purchasers at bonsai conventions often don't have the option of carting an extra 94 pound bag of cement in their luggage. [Though I'd like to hear the story of getting that powder through airport security... :-)...] This isn't a project for one person creating slabs for their personal collection. It sounds to me that a friend might be need in Virginia Bonsai Society (Norfolk VA-- near Chesapeake) to scope alternatives. VBS has a website with contact information for their president Ronnie Baum http://www.vafgs.org/virginia_bonsai_society.htm. Ronnie is a great guy! With enough interests (and likely a prepaid order), some Ciment Fondue could wind its way to this year's bonsai convention in St. Louis or at next year's World Bonsai Convention in Washington DC... or to any other site someone in the bonsai community is trucking material. Best wishes, Chris... C. Cochrane, , Richmond VA USA ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#35
|
|||
|
|||
[IBC] Ciment Fondu
Hi Doug.
You write RE' Ciment Fondue manufacturer irep' in Virginia: We ship most Fondu directly from our plant in VA in minimum pallet quantities. This stuff is also made & used in Canada: http://www.lafargecorp.com/cmtp cfd.htm Here's the Virginia site for data, which notes the smallest packaging is 94 pound bags: http://www.lcainc.com/fondu.html .... & on Secar products, that someone mentioned: http://www.lcainc.com/product.html My club (in Richmond VA) purchased it with help from local bonsai enthusiasts in Chesapeake VA (admittedly several years ago) & picked-up the bags we needed. The Ciment Fondue is HEAVY, of course, and latex molds are very expensive to make even you already have a good stone as a mold. If you can borrow molds (we did), it is a godsend. Bonsai vendors can't assume there is a market for ciment fondue because the molds are REALLY expensive to make. Vendors also realize purchasers at bonsai conventions often don't have the option of carting an extra 94 pound bag of cement in their luggage. [Though I'd like to hear the story of getting that powder through airport security... :-)...] This isn't a project for one person creating slabs for their personal collection. It sounds to me that a friend might be need in Virginia Bonsai Society (Norfolk VA-- near Chesapeake) to scope alternatives. VBS has a website with contact information for their president Ronnie Baum http://www.vafgs.org/virginia_bonsai_society.htm. Ronnie is a great guy! With enough interests (and likely a prepaid order), some Ciment Fondue could wind its way to this year's bonsai convention in St. Louis or at next year's World Bonsai Convention in Washington DC... or to any other site someone in the bonsai community is trucking material. Best wishes, Chris... C. Cochrane, , Richmond VA USA ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#36
|
|||
|
|||
[IBC] Ciment Fondu
Hi Doug.
You write RE' Ciment Fondue manufacturer irep' in Virginia: We ship most Fondu directly from our plant in VA in minimum pallet quantities. This stuff is also made & used in Canada: http://www.lafargecorp.com/cmtp cfd.htm Here's the Virginia site for data, which notes the smallest packaging is 94 pound bags: http://www.lcainc.com/fondu.html .... & on Secar products, that someone mentioned: http://www.lcainc.com/product.html My club (in Richmond VA) purchased it with help from local bonsai enthusiasts in Chesapeake VA (admittedly several years ago) & picked-up the bags we needed. The Ciment Fondue is HEAVY, of course, and latex molds are very expensive to make even you already have a good stone as a mold. If you can borrow molds (we did), it is a godsend. Bonsai vendors can't assume there is a market for ciment fondue because the molds are REALLY expensive to make. Vendors also realize purchasers at bonsai conventions often don't have the option of carting an extra 94 pound bag of cement in their luggage. [Though I'd like to hear the story of getting that powder through airport security... :-)...] This isn't a project for one person creating slabs for their personal collection. It sounds to me that a friend might be need in Virginia Bonsai Society (Norfolk VA-- near Chesapeake) to scope alternatives. VBS has a website with contact information for their president Ronnie Baum http://www.vafgs.org/virginia_bonsai_society.htm. Ronnie is a great guy! With enough interests (and likely a prepaid order), some Ciment Fondue could wind its way to this year's bonsai convention in St. Louis or at next year's World Bonsai Convention in Washington DC... or to any other site someone in the bonsai community is trucking material. Best wishes, Chris... C. Cochrane, , Richmond VA USA ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#37
|
|||
|
|||
[IBC] Ciment Fondu
Yes ! This is where i should 'chime in' again! My slabs, while very
functional are not extremely natural looking .... they look thick, and have the texture of a frosted cake (hard of course) ... I'm going to try the next time with a natural slab, and put 'muck' around the perimeter to retain soil ... NOW my question is where do i find the clay that i'm supposed to mix with peat moss to make my muck ? (Michael Persiano) wrote in message ... In a message dated 2/19/2004 12:22:44 PM Eastern Standard Time, writes: Hi Kevin. You graciously write, Don't forget to add the magic ingredient - a proportion of Ordinary Cement, or the rapid set is not achieved When my bonsai club created a ciment fondue slabs, they set for at least 24 hours. We might well have used Portland cement-- I would guess that we did. Is there advantage to rapid-setting other than being "rapid?" Perhaps 24 hour setting is rapid though it would seem painfully slow for curing our thin pours. LaFarge Ciment Fondue should be allowed to slowly cure to avoid cracking and thereby ensure the slab's ability to endure extreme heat and cold. I recommend spraying the slab during the first day of curing. My personal opinion is that the design of the slab should be the primary concern and not the speed with which the mixture dries. Creating a credible, non-molded slab is a difficult thing to pull off. Cordially, Michael Persiano ************************************************** ****************************** ++++Sponsored, in part, by Marc Zimmerman++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#38
|
|||
|
|||
[IBC] Ciment Fondu
Yes ! This is where i should 'chime in' again! My slabs, while very
functional are not extremely natural looking .... they look thick, and have the texture of a frosted cake (hard of course) ... I'm going to try the next time with a natural slab, and put 'muck' around the perimeter to retain soil ... NOW my question is where do i find the clay that i'm supposed to mix with peat moss to make my muck ? (Michael Persiano) wrote in message ... In a message dated 2/19/2004 12:22:44 PM Eastern Standard Time, writes: Hi Kevin. You graciously write, Don't forget to add the magic ingredient - a proportion of Ordinary Cement, or the rapid set is not achieved When my bonsai club created a ciment fondue slabs, they set for at least 24 hours. We might well have used Portland cement-- I would guess that we did. Is there advantage to rapid-setting other than being "rapid?" Perhaps 24 hour setting is rapid though it would seem painfully slow for curing our thin pours. LaFarge Ciment Fondue should be allowed to slowly cure to avoid cracking and thereby ensure the slab's ability to endure extreme heat and cold. I recommend spraying the slab during the first day of curing. My personal opinion is that the design of the slab should be the primary concern and not the speed with which the mixture dries. Creating a credible, non-molded slab is a difficult thing to pull off. Cordially, Michael Persiano ************************************************** ****************************** ++++Sponsored, in part, by Marc Zimmerman++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#39
|
|||
|
|||
[IBC] Ciment Fondu
Yes ! This is where i should 'chime in' again! My slabs, while very
functional are not extremely natural looking .... they look thick, and have the texture of a frosted cake (hard of course) ... I'm going to try the next time with a natural slab, and put 'muck' around the perimeter to retain soil ... NOW my question is where do i find the clay that i'm supposed to mix with peat moss to make my muck ? (Michael Persiano) wrote in message ... In a message dated 2/19/2004 12:22:44 PM Eastern Standard Time, writes: Hi Kevin. You graciously write, Don't forget to add the magic ingredient - a proportion of Ordinary Cement, or the rapid set is not achieved When my bonsai club created a ciment fondue slabs, they set for at least 24 hours. We might well have used Portland cement-- I would guess that we did. Is there advantage to rapid-setting other than being "rapid?" Perhaps 24 hour setting is rapid though it would seem painfully slow for curing our thin pours. LaFarge Ciment Fondue should be allowed to slowly cure to avoid cracking and thereby ensure the slab's ability to endure extreme heat and cold. I recommend spraying the slab during the first day of curing. My personal opinion is that the design of the slab should be the primary concern and not the speed with which the mixture dries. Creating a credible, non-molded slab is a difficult thing to pull off. Cordially, Michael Persiano ************************************************** ****************************** ++++Sponsored, in part, by Marc Zimmerman++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#40
|
|||
|
|||
[IBC] Ciment Fondu
Yes ! This is where i should 'chime in' again! My slabs, while very
functional are not extremely natural looking .... they look thick, and have the texture of a frosted cake (hard of course) ... I'm going to try the next time with a natural slab, and put 'muck' around the perimeter to retain soil ... NOW my question is where do i find the clay that i'm supposed to mix with peat moss to make my muck ? (Michael Persiano) wrote in message ... In a message dated 2/19/2004 12:22:44 PM Eastern Standard Time, writes: Hi Kevin. You graciously write, Don't forget to add the magic ingredient - a proportion of Ordinary Cement, or the rapid set is not achieved When my bonsai club created a ciment fondue slabs, they set for at least 24 hours. We might well have used Portland cement-- I would guess that we did. Is there advantage to rapid-setting other than being "rapid?" Perhaps 24 hour setting is rapid though it would seem painfully slow for curing our thin pours. LaFarge Ciment Fondue should be allowed to slowly cure to avoid cracking and thereby ensure the slab's ability to endure extreme heat and cold. I recommend spraying the slab during the first day of curing. My personal opinion is that the design of the slab should be the primary concern and not the speed with which the mixture dries. Creating a credible, non-molded slab is a difficult thing to pull off. Cordially, Michael Persiano ************************************************** ****************************** ++++Sponsored, in part, by Marc Zimmerman++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#41
|
|||
|
|||
[IBC] Ciment Fondu
Therer are many, many recipes for Muck without using clay. If you have
time, check out the archives. Carl L. Rosner - near Atlantic City zone 6/7 http://bmee.net/rosner http://www.jamesbaird.com/cgi-bin/Ja...d=00000068 48 http://www.jamesbaird.com/cgi-bin/Ja...d=00000068 48 Allen wrote: Yes ! This is where i should 'chime in' again! My slabs, while very functional are not extremely natural looking .... they look thick, and have the texture of a frosted cake (hard of course) ... I'm going to try the next time with a natural slab, and put 'muck' around the perimeter to retain soil ... NOW my question is where do i find the clay that i'm supposed to mix with peat moss to make my muck ? ************************************************** ****************************** ++++Sponsored, in part, by Marc Zimmerman++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#42
|
|||
|
|||
[IBC] Ciment Fondu
Over here in Holland the art-schools with a sculptural division use the
Lafarge-Fondu for sculptural work. It can therefore easily be obtained at a dealer of sculptural requisites. Perhaps this is also the case in USA, Worth a try I think. Good luck, elize ----- Original Message ----- From: "Chris Cochrane" To: Sent: Tuesday, February 24, 2004 3:14 PM Subject: [IBC] Ciment Fondu Hi Doug. You write RE' Ciment Fondue manufacturer irep' in Virginia: We ship most Fondu directly from our plant in VA in minimum pallet quantities. This stuff is also made & used in Canada: http://www.lafargecorp.com/cmtp cfd.htm Here's the Virginia site for data, which notes the smallest packaging is 94 pound bags: http://www.lcainc.com/fondu.html ... & on Secar products, that someone mentioned: http://www.lcainc.com/product.html My club (in Richmond VA) purchased it with help from local bonsai enthusiasts in Chesapeake VA (admittedly several years ago) & picked-up the bags we needed. The Ciment Fondue is HEAVY, of course, and latex molds are very expensive to make even you already have a good stone as a mold. If you can borrow molds (we did), it is a godsend. Bonsai vendors can't assume there is a market for ciment fondue because the molds are REALLY expensive to make. Vendors also realize purchasers at bonsai conventions often don't have the option of carting an extra 94 pound bag of cement in their luggage. [Though I'd like to hear the story of getting that powder through airport security... :-)...] This isn't a project for one person creating slabs for their personal collection. It sounds to me that a friend might be need in Virginia Bonsai Society (Norfolk VA-- near Chesapeake) to scope alternatives. VBS has a website with contact information for their president Ronnie Baum http://www.vafgs.org/virginia_bonsai_society.htm. Ronnie is a great guy! With enough interests (and likely a prepaid order), some Ciment Fondue could wind its way to this year's bonsai convention in St. Louis or at next year's World Bonsai Convention in Washington DC... or to any other site someone in the bonsai community is trucking material. Best wishes, Chris... C. Cochrane, , Richmond VA USA ************************************************** ************************** **** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ************************** **** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#43
|
|||
|
|||
[IBC] Ciment Fondu
I was once told that Ciment Fondu is used for lining furnaces. It is gypsum
type product It has a fine cosistency, which allows it to be applied with a paint brush. or can also be drizzled, to create mountains Chase Rosade does have a couple slab forests on slabs of ciment Fondue I saw them when I vsited the studio Last fall. I had some but I kept it in a damp area and ruined it all. I obtained it all from my Bonsai club a few years ago. I do not rememeber the name of the company that distributed it. I only remembber that it was in Maryland ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#44
|
|||
|
|||
[IBC] Ciment Fondu
I was once told that Ciment Fondu is used for lining furnaces. It is gypsum
type product It has a fine cosistency, which allows it to be applied with a paint brush. or can also be drizzled, to create mountains Chase Rosade does have a couple slab forests on slabs of ciment Fondue I saw them when I vsited the studio Last fall. I had some but I kept it in a damp area and ruined it all. I obtained it all from my Bonsai club a few years ago. I do not rememeber the name of the company that distributed it. I only remembber that it was in Maryland ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
#45
|
|||
|
|||
[IBC] Ciment Fondu
I was once told that Ciment Fondu is used for lining furnaces. It is gypsum
type product It has a fine cosistency, which allows it to be applied with a paint brush. or can also be drizzled, to create mountains Chase Rosade does have a couple slab forests on slabs of ciment Fondue I saw them when I vsited the studio Last fall. I had some but I kept it in a damp area and ruined it all. I obtained it all from my Bonsai club a few years ago. I do not rememeber the name of the company that distributed it. I only remembber that it was in Maryland ************************************************** ****************************** ++++Sponsored, in part, by Ken Rutledge++++ ************************************************** ****************************** -- The IBC HOME PAGE & FAQ: http://www.internetbonsaiclub.org/ -- +++++ Questions? Help? e-mail +++++ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ciment Fondu | Bonsai | |||
[IBC] ***** [IBC] Was [IBC] ADMIN: sloooow - added Holiday Care | Bonsai | |||
[IBC] FW: [IBC] Mastering Technique (Was [IBC] proposal) | Bonsai | |||
[IBC] FW: [IBC] Mastering Technique (Was [IBC] proposal) | Bonsai | |||
[IBC] To: IBC Enforcer (was: [IBC] Juniper Bonsai life expectancy?) | Bonsai |