Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old 20-04-2003, 06:11 AM
BruceKGeist
 
Posts: n/a
Default UV sterilizer: will it help limit surface scum?

Will a UV strelizer help with surface scum? No matter what I do, I get a
pretty thick surface scum by the end of the week.

Also, how does one decide on what size UV sterilizer to get? Any specific
recommendations for a 135 gallon tank?

Thanks in advance..

-Bruce Geist


  #2   Report Post  
Old 20-04-2003, 06:11 AM
BruceKGeist
 
Posts: n/a
Default UV sterilizer: will it help limit surface scum?

Thanks Leigh..I very much appreciate your response.

Surface scum is not a huge issue for me, since I have a rather large canopy
that disguises it. But it would be nice to do something to limit it. Surface
current is probably the only way then.. Huh.

I am not concerned about CO2 loss, since I use a controller. In fact, I already
have three powerheads with low output, (~30 gph) to try to move the surface a
bit. (My tank is 135 gallons.) However, I may try a slightly more aggressive
flow. I am a bit worried, for the following reason.

Near my filter return, I tend to get blue-green algae every now and then. It
only appears near the filter return, and does not spread beyond that immediate
vicinity. I have come to believe that this may be due to my (low) nitrate
level and the fact that blue green algae can extract nitrogen from air. (What
is your perspective? Ever see this problem?) Now that I am actually testing
nitrates however, I am not so sure.. my nitrates seem to be smack dab in the
middle of the desirable range-- i.e., after a water change they are about 3
ppm, and toward the end of the week, they creep up to somewhere near 5 ppm.
Should I be shooting for somewhere near 10ppm?

At any rate, my worry is that if I put more surface current, maybe I will get
significant blue-green algae problems. What do you think?. Is there something
else going on here I am not picking up?

With my nitrate levels where they are, I am not intending to do much
supplementing. Right now, I believe potassium is my limiting nutrient. I am
adding more of that per week in addition to TMG (and have always added TMG).
If my nitrates sink really low with the addition of the extra potassium, then I
may supplement with nitrates. Sound like a decent approach?

Perhaps that will eliminate blue-green algae outbreaks all together. Does
anyone know if potassium shortage is linked to blue-green algae problems?

-Bruce
  #3   Report Post  
Old 20-04-2003, 06:12 AM
Mathias
 
Posts: n/a
Default UV sterilizer: will it help limit surface scum?

I had the same problem, but I got a small surface skimmer that fluval makes.
I costs about $10 so its rather cheap. It simply plugs into your hose on the
canister intake, and continuosly skims the surface for any debris and scum,
sucking it into the canister filter where it is consumed by our friends the
bacteria. I've had it for about a year now, and never had any problems with
surface scum or floating debris.

I'm sure there are other manufacturers of similar products, but so far, I've
just found this one. And at $10, I'm not looking any further! :-)

Good luck!

/Mathias

"BruceKGeist" skrev i meddelandet
...
Will a UV strelizer help with surface scum? No matter what I do, I get a
pretty thick surface scum by the end of the week.

Also, how does one decide on what size UV sterilizer to get? Any specific
recommendations for a 135 gallon tank?

Thanks in advance..

-Bruce Geist



  #4   Report Post  
Old 20-04-2003, 06:12 AM
BruceKGeist
 
Posts: n/a
Default UV sterilizer: will it help limit surface scum?

Nice to know! Thanks for the information. I am gonna take a look around ...

-Bruce


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The lower limit of seed size to organize energy and produce a plant; what is it? [email protected] Plant Science 9 14-05-2006 06:21 PM
How to choose (limit) roses? Kirra Roses 8 19-06-2003 06:40 AM
[IBC] Size Limit For Air Layer Jim S Bonsai 1 24-05-2003 08:08 PM
Lily limit in pond? Fred Ponds 5 24-04-2003 08:32 PM


All times are GMT +1. The time now is 04:11 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004-2019 GardenBanter.co.uk.
The comments are property of their posters.
 

About Us

"It's about Gardening"

 

Copyright © 2017