Home |
Search |
Today's Posts |
#1
|
|||
|
|||
broadcast spreader repair
End of last fall season I acquired a used Scotts broadcast spreader
(at the curb on trash day). The rotating mechanism is corroded and hard to turn. Yesterday I decided it's time to work on it and see if I can get it to working condition again. I lubed all rotating joints and the gear. It's at the point where I think the problem is at the hopper where the driveshaft and the plastic meet and penetrating oil can't (or hasn't) get in there. I gave it a brief try but didn't want to force anything. Looks like there is a rolled pin and a collar with a set screw. I lightly punched the pin and tried to unscrew the set screw but neither budged. Anyone even taken this thing apart? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Agway fertilizer and Scotts broadcast spreader - what setting??? | Gardening | |||
walk behind broadcast spreader | North Carolina | |||
walk behind broadcast spreader | North Carolina | |||
Need Info On Broadcast Spreader That Works Near Edge | Gardening | |||
FS: broadcast spreader & aerator/seeder | North Carolina |