Home |
Search |
Today's Posts |
#1
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
Just bought this tractor, so far I love it... problem is that I have
front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch independently... problem is that I often would like to use my loader, before or after cutting grass... with my current setup I have only four hydraulic positions, two are used to raise and lower my bucket, and two for raising or lowering my mower deck... in order to then use the bucket to dump, I have to disconnect the two for the mower and hook up the two for the bucket... now my question, Do they make some sort of hydraulic selector valve that I can have all the hoses hooked up at the same time, and select with a lever or switch either bucket or mower? If so could you please point me in the right direction?? oh, also I don't want to spend a ton to do this... thanks so much for any help!!! |
#2
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
wrote in message oups.com... Just bought this tractor, so far I love it... problem is that I have front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch independently... problem is that I often would like to use my loader, before or after cutting grass... with my current setup I have only four hydraulic positions, two are used to raise and lower my bucket, and two for raising or lowering my mower deck... in order to then use the bucket to dump, I have to disconnect the two for the mower and hook up the two for the bucket... now my question, Do they make some sort of hydraulic selector valve that I can have all the hoses hooked up at the same time, and select with a lever or switch either bucket or mower? If so could you please point me in the right direction?? oh, also I don't want to spend a ton to do this... thanks so much for any help!!! Let me guess - you're from NYC, right ? |
#3
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
actually, no, and if that was some kind of insult.. it was
unnecessary, I think this is a legitimate question... I've always lived in the country, but never had a bigger tractor (couldn't afford it). so if you have an answer, I would appriciate it... Srgnt Billko wrote: wrote in message oups.com... Just bought this tractor, so far I love it... problem is that I have front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch independently... problem is that I often would like to use my loader, before or after cutting grass... with my current setup I have only four hydraulic positions, two are used to raise and lower my bucket, and two for raising or lowering my mower deck... in order to then use the bucket to dump, I have to disconnect the two for the mower and hook up the two for the bucket... now my question, Do they make some sort of hydraulic selector valve that I can have all the hoses hooked up at the same time, and select with a lever or switch either bucket or mower? If so could you please point me in the right direction?? oh, also I don't want to spend a ton to do this... thanks so much for any help!!! Let me guess - you're from NYC, right ? |
#4
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
"Srgnt Billko" wrote:
Let me guess - you're from NYC, right ? No advice, why reply? |
#5
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
"Steveo" wrote in message ... "Srgnt Billko" wrote: Let me guess - you're from NYC, right ? No advice, why reply? No advice ? Why reply ? |
#6
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
"Srgnt Billko" wrote:
"Steveo" wrote in message ... "Srgnt Billko" wrote: Let me guess - you're from NYC, right ? No advice, why reply? No advice ? Why reply ? Let me guess - you're from NYC, right ? |
#7
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
"Steveo" wrote in message ... "Srgnt Billko" wrote: "Steveo" wrote in message ... "Srgnt Billko" wrote: Let me guess - you're from NYC, right ? No advice, why reply? No advice ? Why reply ? Let me guess - you're from NYC, right ? Could be, he thinks a walnut sapling has some monetary value. |
#8
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
|
#10
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
|
#11
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
Srgnt Billko wrote:
"Joe" wrote in message .. . wrote: Just bought this tractor, so far I love it... problem is that I have front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch independently... problem is that I often would like to use my loader, before or after cutting grass... with my current setup I have only four hydraulic positions, two are used to raise and lower my bucket, and two for raising or lowering my mower deck... in order to then use the bucket to dump, I have to disconnect the two for the mower and hook up the two for the bucket... now my question, Do they make some sort of hydraulic selector valve that I can have all the hoses hooked up at the same time, and select with a lever or switch either bucket or mower? If so could you please point me in the right direction?? oh, also I don't want to spend a ton to do this... thanks so much for any help!!! uhh, what knid of tractor? Does it make a difference ? no advice, why reply? |
#12
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
"Joe" wrote in message .. . Srgnt Billko wrote: "Joe" wrote in message .. . wrote: Just bought this tractor, so far I love it... problem is that I have front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch independently... problem is that I often would like to use my loader, before or after cutting grass... with my current setup I have only four hydraulic positions, two are used to raise and lower my bucket, and two for raising or lowering my mower deck... in order to then use the bucket to dump, I have to disconnect the two for the mower and hook up the two for the bucket... now my question, Do they make some sort of hydraulic selector valve that I can have all the hoses hooked up at the same time, and select with a lever or switch either bucket or mower? If so could you please point me in the right direction?? oh, also I don't want to spend a ton to do this... thanks so much for any help!!! uhh, what knid of tractor? Does it make a difference ? no advice, why reply? Just to point out that you asked a stupid question - that's all. |
#13
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
wrote in message ups.com... guess, Ill look elsewhere for an answer.. apparently nothing but immature rednecks with a chip on thier shoulder here... If you had been the least familiar with this group you would have realized you wouldn't get an answer to that nutsy question in here. You just wasted time. When you go to another place make sure you include that part about only wanting to spend 2 or 3 bucks. Srgnt Billko wrote: "Joe" wrote in message .. . Srgnt Billko wrote: "Joe" wrote in message .. . wrote: Just bought this tractor, so far I love it... problem is that I have front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch independently... problem is that I often would like to use my loader, before or after cutting grass... with my current setup I have only four hydraulic positions, two are used to raise and lower my bucket, and two for raising or lowering my mower deck... in order to then use the bucket to dump, I have to disconnect the two for the mower and hook up the two for the bucket... now my question, Do they make some sort of hydraulic selector valve that I can have all the hoses hooked up at the same time, and select with a lever or switch either bucket or mower? If so could you please point me in the right direction?? oh, also I don't want to spend a ton to do this... thanks so much for any help!!! uhh, what knid of tractor? Does it make a difference ? no advice, why reply? Just to point out that you asked a stupid question - that's all. |
#14
|
|||
|
|||
John Deere 2520 hydraulic question, please Help
On 24 Jul 2006 16:26:55 -0700, wrote:
Just bought this tractor, so far I love it... problem is that I have front loader, and mid deck... well I paid for the extra lift kit for the mower so I could use my 3-Point hitch independently... problem is that I often would like to use my loader, before or after cutting grass... with my current setup I have only four hydraulic positions, two are used to raise and lower my bucket, and two for raising or lowering my mower deck... in order to then use the bucket to dump, I have to disconnect the two for the mower and hook up the two for the bucket... now my question, Do they make some sort of hydraulic selector valve that I can have all the hoses hooked up at the same time, and select with a lever or switch either bucket or mower? If so could you please point me in the right direction?? oh, also I don't want to spend a ton to do this... thanks so much for any help!!! Go to http://www.mytractorforum.com/ and post your question there. It's a great bunch of folks and I'm sure you'll get a straight answer without all the silliness & BS. Kenny |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
John Deere JS63VC - information please | United Kingdom | |||
Easy to see, Expat owns John Smith and John Smith is ExpatsPuppet on a String! hahahaha ..... Dance Johnny boy.. dance you fool!John Smith the puppet on a string | Ponds | |||
lawn tractor advice, please - john deere 111 | Lawns | |||
John Deere 300 trans dipstick help | Gardening | |||
John Deere 300 trans dipstick help | Lawns |