Home |
Search |
Today's Posts |
#16
|
|||
|
|||
Pond Liner
Hal wrote:
On Sat, 16 Aug 2008 13:50:18 EDT, Sheila wrote: Yesterday we were talking to a guy who builds ponds and he said that a vinyl liner will crack in several years and a rubber liner is the way to go. We were talking to him about how to redo our pond. Is vinyl, which we have not going to hold up for many years? When a Georgia contractor says rubber liner, he probably means EPDM, which some still call rubber, hard rubber or roofing sheet rubber. Butyl isn't readily available here in sheets, although you may find some in tapes and sealers for repairs. In fact you will be lucky if you can find a roofing supply house that still handles sheet EPDM. I'm in Warner Robins and my first EPDM liner, (An EPDM roofing sheet.) came from Warner Robins Supply, a local building supply and my last one from he http://www.justliners.com/epdm.htm No, the liner didn't go bad, the lawn timbers rotted. I changed the pond from a wooden frame above ground to a retaining wall stone frame above ground. Thanks for the info Hal. Well, we decided not to redo the 'pond' really just used as a fountain until the vinyl cracks. I wanted to put in a drain, to make it easier to clean, but will wait for now. Sheila |
#17
|
|||
|
|||
Pond Liner
Derek Broughton wrote:
Millimeters? Not "mils"? Liners in N. America are generally measured in mils, and a 75 mil liner is thick. If it's really .75 mm, that's 30 mils, and I'd say too thin for an EPDM or vinyl liner, but not HDPE and _perhaps_ not Butyl. Either way, butyl is a lot heavier than any of the alternatives at the same thickness. If it isn't heavier, it isn't butyl. My 0.75 millimetre butyl liner...... http://www.bradshawsdirect.co.uk/Bra...oduct/GLBU.htm QED ? -- Pete C London UK |
#18
|
|||
|
|||
Pond Liner
On Sun, 17 Aug 2008 11:41:41 EDT, ~ jan wrote:
I haven't purchased EPDM since 2001. Has this gone up in price since I assume it is a petroleum product? What is the latest on prices? ~ jan I don't know what it was in 2001, or even yesterday, but here is a place to check for price today, at least in my neighborhood. http://www.justliners.com/epdm.htm -- Hal Middle Georgia, Zone 8 http://tinyurl.com/2fxzcb |
#19
|
|||
|
|||
Pond Liner
On Sun, 17 Aug 2008 23:12:02 EDT, Sheila
wrote: Well, we decided not to redo the 'pond' really just used as a fountain until the vinyl cracks. I wanted to put in a drain, to make it easier to clean, but will wait for now. It is a good idea to plan well for a bottom drain when you do decide to replace the liner. I buried my filter barrels and can't drain them, but have to use a shop vac to clean them. OTOH my pond bottom drain is gravity flow through the filters and pumped from the third barrel. Most of us in this part of Georgia don't have our ponds on a nice hill that would allow draining everything by gravity flow, but that is a nice feature, if it is practical for you. -- Hal Middle Georgia, Zone 8 http://tinyurl.com/2fxzcb |
#20
|
|||
|
|||
Pond Liner
Pete C wrote:
Derek Broughton wrote: Millimeters? Not "mils"? Liners in N. America are generally measured in mils, and a 75 mil liner is thick. If it's really .75 mm, that's 30 mils, and I'd say too thin for an EPDM or vinyl liner, but not HDPE and _perhaps_ not Butyl. Either way, butyl is a lot heavier than any of the alternatives at the same thickness. If it isn't heavier, it isn't butyl. My 0.75 millimetre butyl liner...... http://www.bradshawsdirect.co.uk/Bra...oduct/GLBU.htm QED ? QED what? I'd already discovered that in the UK they were typically being sold in .75mm, so I have no problem with that, but it's _still_ much heavier than any other pond liner for the same thickness. Unfortunately I can't find any actual weights - only the warnings that they need special shipping, which usually applies to EPDM, too. -- derek |
#21
|
|||
|
|||
Pond Liner
On Mon, 18 Aug 2008 10:22:36 EDT, Hal wrote:
I don't know what it was in 2001, or even yesterday, but here is a place to check for price today, at least in my neighborhood. http://www.justliners.com/epdm.htm Doesn't look like it has gone up much in price. Tx, Hal. ~ jan ------------ Zone 7a, SE Washington State Ponds: www.jjspond.us |
#22
|
|||
|
|||
Pond Liner
Hal wrote:
On Sun, 17 Aug 2008 23:12:02 EDT, Sheila wrote: Well, we decided not to redo the 'pond' really just used as a fountain until the vinyl cracks. I wanted to put in a drain, to make it easier to clean, but will wait for now. It is a good idea to plan well for a bottom drain when you do decide to replace the liner. I buried my filter barrels and can't drain them, but have to use a shop vac to clean them. OTOH my pond bottom drain is gravity flow through the filters and pumped from the third barrel. Most of us in this part of Georgia don't have our ponds on a nice hill that would allow draining everything by gravity flow, but that is a nice feature, if it is practical for you. Gravity drain is what I would do, because my pond is above ground with a rock wall exterior, also it is higher because our back yard slopes to the rear slightly and it is fairly close to the house. Never will I build a pond without a drain. Sheila |
#23
|
|||
|
|||
Pond Liner
Derek Broughton wrote:
Pete C wrote: Derek Broughton wrote: Millimeters? Not "mils"? Liners in N. America are generally measured in mils, and a 75 mil liner is thick. If it's really .75 mm, that's 30 mils, and I'd say too thin for an EPDM or vinyl liner, but not HDPE and _perhaps_ not Butyl. Either way, butyl is a lot heavier than any of the alternatives at the same thickness. If it isn't heavier, it isn't butyl. My 0.75 millimetre butyl liner...... http://www.bradshawsdirect.co.uk/Bra...oduct/GLBU.htm QED ? QED what? I'd already discovered that in the UK they were typically being sold in .75mm, so I have no problem with that, but it's _still_ much heavier than any other pond liner for the same thickness. Unfortunately I can't find any actual weights - only the warnings that they need special shipping, which usually applies to EPDM, too. looked for weights too, with no more success than you. As 45 mil EPDM is in fact 1.14mm thick, wouldn't that be more likely to be the heavier? -- Pete C London UK |
#24
|
|||
|
|||
Pond Liner
Pete C wrote: Derek Broughton wrote: Pete C wrote: Derek Broughton wrote: Millimeters? Not "mils"? Liners in N. America are generally measured in mils, and a 75 mil liner is thick. If it's really .75 mm, that's 30 mils, and I'd say too thin for an EPDM or vinyl liner, but not HDPE and _perhaps_ not Butyl. Either way, butyl is a lot heavier than any of the alternatives at the same thickness. If it isn't heavier, it isn't butyl. My 0.75 millimetre butyl liner...... http://www.bradshawsdirect.co.uk/Bra...oduct/GLBU.htm QED ? QED what? I'd already discovered that in the UK they were typically being sold in .75mm, so I have no problem with that, but it's _still_ much heavier than any other pond liner for the same thickness. Unfortunately I can't find any actual weights - only the warnings that they need special shipping, which usually applies to EPDM, too. looked for weights too, with no more success than you. As 45 mil EPDM is in fact 1.14mm thick, wouldn't that be more likely to be the heavier? EPDM : 1.02 mm (.040²) 1.25 kg/m2 1.14 mm (.045²) 1.41 kg/m2 from this link: http://www.firestonebpe.com/lining/s...omembrane/_en/ Interesting that they say the lighter one is recommended for garden ponds .. They seem to not want to give us the weight of butyl, can't find it anywhere. San Diego Joe 4,000 - 5,000 Gallons. Koi, Goldfish, and RES named Colombo. |
#25
|
|||
|
|||
Pond Liner
San Diego Joe wrote:
Pete C wrote: Derek Broughton wrote: Pete C wrote: Derek Broughton wrote: Millimeters? Not "mils"? Liners in N. America are generally measured in mils, and a 75 mil liner is thick. If it's really .75 mm, that's 30 mils, and I'd say too thin for an EPDM or vinyl liner, but not HDPE and _perhaps_ not Butyl. Either way, butyl is a lot heavier than any of the alternatives at the same thickness. If it isn't heavier, it isn't butyl. My 0.75 millimetre butyl liner...... http://www.bradshawsdirect.co.uk/Bra...oduct/GLBU.htm QED ? QED what? I'd already discovered that in the UK they were typically being sold in .75mm, so I have no problem with that, but it's _still_ much heavier than any other pond liner for the same thickness. Unfortunately I can't find any actual weights - only the warnings that they need special shipping, which usually applies to EPDM, too. looked for weights too, with no more success than you. As 45 mil EPDM is in fact 1.14mm thick, wouldn't that be more likely to be the heavier? EPDM : 1.02 mm (.040²) 1.25 kg/m2 1.14 mm (.045²) 1.41 kg/m2 from this link: http://www.firestonebpe.com/lining/s...omembrane/_en/ Interesting that they say the lighter one is recommended for garden ponds . They seem to not want to give us the weight of butyl, can't find it anywhere. Thanks for that anyway -- Pete C London UK |
#26
|
|||
|
|||
Pond Liner
Pete C wrote:
looked for weights too, with no more success than you. As 45 mil EPDM is in fact 1.14mm thick, wouldn't that be more likely to be the heavier? No, because Butyl is a denser rubber. -- derek |
#27
|
|||
|
|||
Pond Liner
Sheila wrote:
Yesterday we were talking to a guy who builds ponds and he said that a vinyl liner will crack in several years and a rubber liner is the way to go. We were talking to him about how to redo our pond. Is vinyl, which we have not going to hold up for many years? Sheila Sheila and others may find this interesting...... http://www.pond-solutions.co.uk/FAQ/...tyl_rubber.htm -- Pete C London UK |
#28
|
|||
|
|||
Pond Liner
Pete C wrote:
Sheila wrote: Yesterday we were talking to a guy who builds ponds and he said that a vinyl liner will crack in several years and a rubber liner is the way to go. We were talking to him about how to redo our pond. Is vinyl, which we have not going to hold up for many years? Sheila Sheila and others may find this interesting...... http://www.pond-solutions.co.uk/FAQ/...tyl_rubber.htm Thanks for the site information. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pond Liner Material Identification - What Pond Liner to Choose | Ponds (alternative) | |||
Pond Liner vs. Roof Liner | Ponds | |||
Concealing liner, or how to make seal above liner? | Ponds | |||
Xavan pond liner/ pond lights | Ponds | |||
Coconut Liner and/or rubber liner for window box planters | Gardening |