Home |
Search |
Today's Posts |
#31
|
|||
|
|||
Wow! Skippy's filter really DOES work!
"SkyCatcher" wrote in message
... Thanks folks for the links - now all I have to do is translate it into UK equivalents (I don't think we have these rubbermaid tanks over here! I took the basic concept but used a hole in the ground with liner instead of a tank. The pipe goes on top of the liner to the bottom, not through the liner. The output flows into a stream to the pond. Works great. |
#32
|
|||
|
|||
Wow! Skippy's filter really DOES work!
When we made ours instead of using a toilet flange we used two shower drains. They come complete with the perforated grates. We already had two lines going back to the top of the header pond. Problem is a lot of air is also going down the lines and we keep getting burping noises. Any ideas on how to stop this? Hmmmm maybe a small vent pipe in the drain pipe? |
#33
|
|||
|
|||
Wow! Skippy's filter really DOES work!
At the pond end or the filter end? Well, dunno really...was thinking of the vents in the plumbing of a house... Wonder if Skippy's site could have any suggestions? My drain doesn't burp, I think maybe because the drain is twice as big as the inlet pipe? Hey, maybe a smaller diameter of pipe running down into the drain pipe a few inches or so to vent the air would do the trick for you? |
#34
|
|||
|
|||
Wow! Skippy's filter really DOES work!
When we made ours instead of using a toilet flange we used two shower
drains. They come complete with the perforated grates. We already had two lines going back to the top of the header pond. Problem is a lot of air is also going down the lines and we keep getting burping noises. Any ideas on how to stop this? Heather "Karen Mullen" wrote in message ... In article , GrannyGrump writes: I am going to use quilt batting on top of the media in the one I buikd for the goldfish pond.. make sure it's secured else it floats up. I wrapped mine in the cheap netting from a fabric store, works great and stops the batting from trying to escape down the outflow to the waterfall. Karen Zone 5 Ashland, OH http://hometown.aol.com/kmam1/MyPond/MyPond.html My Art Studio at http://members.aol.com/kmmstudios/K....M.Studios.html for email remove the extra extention |
#35
|
|||
|
|||
Wow! Skippy's filter really DOES work!
Hi Granny:
At the pond end or the filter end? H "GrannyGrump" wrote in message ... When we made ours instead of using a toilet flange we used two shower drains. They come complete with the perforated grates. We already had two lines going back to the top of the header pond. Problem is a lot of air is also going down the lines and we keep getting burping noises. Any ideas on how to stop this? Hmmmm maybe a small vent pipe in the drain pipe? |
#36
|
|||
|
|||
Wow! Skippy's filter really DOES work!
I know what you mean about venting plumbing. This seems vented okay as the
water runs fine. It's the venting (carrying air with the water) that's causing the noise. The upside is that I can hear this inside the house and know the system is running. :) Old filter had pressurized 1 1/4" inlet and two 1 1/4" outlets. The filter would always overflow on start-up until the air got out of the lines. New filter has same pressure coming in. Outlets are two shower drains that are about 3" across then reduced back to the 1 1/4" lines. Both lines are at the same height. Both lines empty just above the water line of the pond at the top of the stream. I'm thinking if I could extend those under the water maybe that would help. Thoughts?? "GrannyGrump" wrote in message ... At the pond end or the filter end? Well, dunno really...was thinking of the vents in the plumbing of a house... Wonder if Skippy's site could have any suggestions? My drain doesn't burp, I think maybe because the drain is twice as big as the inlet pipe? Hey, maybe a smaller diameter of pipe running down into the drain pipe a few inches or so to vent the air would do the trick for you? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Does anyone know the recomended flow rate for a Skippy filter? | Ponds | |||
Wow! Skippy's filter really DOES work! | Ponds | |||
Anyone use tulle as a filter medium in a 'Skippy's Type" filter? | Ponds | |||
Glue really really really works? | Ponds | |||
How does UV filter really work? | Ponds |