Home |
Search |
Today's Posts |
#1
|
|||
|
|||
need pond setup advice
Hello all. I am hoping you might be kind enough to give me a little
advice. I just dug a 19'x10'x2.5' hole that I would like to turn into a pond to house common goldfish and aquatic plants. I have a pond that was built by someone else and is basically a liner, pump, and hose to the top of a waterfall. My existing pond seems to maintain good health and requires a drain and clean aprox. once a year to remove built up muck. I am interested in how effective a skimmer is in eliminating an annual drain and clean and if Firestone epdm roof liner (I can buy Pond Guard liner on line for about $.50 a foot with shipping and the roof liner for $.37 per including tax locally, Pond guard $.95+9% per locally) can be used. I was also told roofing felt was a good underlayment. I would like to save where I can, but also not skimp on quality if the difference in cost is close. So I guess my questions are; 1. What type of liner 45mil or 60mil, roof or pond epdm? Roofing felt? 2. Filter such as skimmer effective and or necessary? 3. Pump brand recomendations ( pond is 2500 to 3000 gal. with a 20 ft. run to a 3 ft. tall waterfall)? 4. Does any one know of a reasonably priced supplier in the New Orleans area? I've tried the usual suspects and liner is is 100% higher, pumps 50% higher than the internet. Thanks in advance |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for advice on CO2 setup | Freshwater Aquaria Plants | |||
need pond setup advice | Ponds | |||
advice on a new planted tank setup | Freshwater Aquaria Plants | |||
Setup for outside lotus container or pond | Ponds | |||
Setup for outside lotus container or pond | Ponds |