My writing is appalling, I can barely read it myself next day! I have
been thinking of getting one of these labelling machines which will
produce clear labels which I can stick to the plastic 15mm wide stick in
plastic labels I use. Brother PT1005BTS and GL-200 seem suitable for
this, though what the difference is between them I am not sure. Has
anyone any experience of these, good or bad, or perhaps can recommend a
better product.
--
Residing on low ground in North Staffordshire

"Moonraker" wrote in message
...
My writing is appalling, I can barely read it myself next day! I have been
thinking of getting one of these labelling machines which will produce
clear labels which I can stick to the plastic 15mm wide stick in plastic
labels I use. Brother PT1005BTS and GL-200 seem suitable for this, though
what the difference is between them I am not sure. Has anyone any
experience of these, good or bad, or perhaps can recommend a better
product.
--
Residing on low ground in North Staffordshire

Don't know the Brother. I've just bought a Dymo LetraTag LT-100H. £17. It
comes with paper label tape but plactic is available which I have. I'm
trialing labels on my plot over the winter to see how they fair.
Pete C

On Tue, 04 Oct 2011 09:23:06 +0100, Moonraker
wrote:

Brother PT1005BTS and GL-200 seem suitable for
this, though what the difference is between them I am not sure.

I use the brother GL-100 , Love it, bought my brother one for this
coming xmas. Check on ebay for sources of cheap refill tape.

Looking at the GL-200 I think you get a clearer idea of what the final
label will look like, before printing, but the end result is the
same, so how about buying the 'old' model, save yourself enough to buy
a few more refills.





Are you a 2012 Gamemaker too?
www.lincolnfuchsiasociety.info

"Moonraker" wrote

My writing is appalling, I can barely read it myself next day! I have been
thinking of getting one of these labelling machines which will produce
clear labels which I can stick to the plastic 15mm wide stick in plastic
labels I use. Brother PT1005BTS and GL-200 seem suitable for this, though
what the difference is between them I am not sure. Has anyone any
experience of these, good or bad, or perhaps can recommend a better
product.

We use a Brother GL-100 for labels in our garden and out on the allotment.
They last years, actually none have shown any problems. Great product and
much better than the old Dymo tape where the machines broke on a regular
basis.
--
Regards. Bob Hobden.
Posted to this Newsgroup from the W of London, UK

On 04/10/2011 18:44, Bob Hobden wrote:
"Moonraker" wrote

My writing is appalling, I can barely read it myself next day! I have
been thinking of getting one of these labelling machines which will
produce clear labels which I can stick to the plastic 15mm wide stick
in plastic labels I use. Brother PT1005BTS and GL-200 seem suitable
for this, though what the difference is between them I am not sure.
Has anyone any experience of these, good or bad, or perhaps can
recommend a better product.

We use a Brother GL-100 for labels in our garden and out on the
allotment. They last years, actually none have shown any problems. Great
product and much better than the old Dymo tape where the machines broke
on a regular basis.
Thanks for the tips, your are absolutely spot on Derek, I got this reply
from an email query to Brother:
"The PT-1005 and the GL-200 are basically the same machine, just sold
into different markets.

The PT machine is aimed at office or home users, and the GL machine is
aimed at the gardening market (GL standing for Garden Labeller)

For example you will find the GL-200 for sale in garden centres, and the
other model in stationary stores etc.

They print the same, and take the same tapes, so basically buy which
ever machine is available the cheapest!

Found the PT1005BTS the cheapest,and at Maplin the cheapest offer, Just
purchased and now trying to get to grips with operating it!



--
Residing on low ground in North Staffordshire

Moonraker wrote:

Thanks for the tips, your are absolutely spot on Derek, I got this reply
from an email query to Brother:
"The PT-1005 and the GL-200 are basically the same machine, just sold
into different markets.

Found the PT1005BTS the cheapest,and at Maplin the cheapest offer, Just
purchased and now trying to get to grips with operating it!

Yes, that does look quite affordable.

I guess, like many other types of printer, the money is made on
the consumables.

Chris
--
Chris J Dixon Nottingham UK


Have dancing shoes, will ceilidh.

On 05/10/2011 14:46, Janet wrote:
In , says...

On 04/10/2011 18:44, Bob Hobden wrote:
"Moonraker" wrote

My writing is appalling, I can barely read it myself next day! I have
been thinking of getting one of these labelling machines which will
produce clear labels which I can stick to the plastic 15mm wide stick
in plastic labels I use. Brother PT1005BTS and GL-200 seem suitable
for this, though what the difference is between them I am not sure.
Has anyone any experience of these, good or bad, or perhaps can
recommend a better product.

We use a Brother GL-100 for labels in our garden and out on the
allotment. They last years, actually none have shown any problems. Great
product and much better than the old Dymo tape where the machines broke
on a regular basis.
Thanks for the tips, your are absolutely spot on Derek, I got this reply
from an email query to Brother:
"The PT-1005 and the GL-200 are basically the same machine, just sold
into different markets.

The PT machine is aimed at office or home users, and the GL machine is
aimed at the gardening market (GL standing for Garden Labeller)

For example you will find the GL-200 for sale in garden centres, and the
other model in stationary stores etc.

They print the same, and take the same tapes, so basically buy which
ever machine is available the cheapest!

Found the PT1005BTS the cheapest,and at Maplin the cheapest offer, Just
purchased and now trying to get to grips with operating it!


Some of have discussed before, making permanent name tags for special
plants/trees using an electric engraver machine and an aluminium tag.

If you're still looking for one, Lidl supermarket' s latest letterbox
flyer arrived today and among the gadgets, they're selling an engraver
similar to mine ..£9.99

Janet.


Thanks for the information Janet, but if I cannot write legibly with a
pen what chance have I with and engraver. As Chris suggested the profit
is certainly with the consumables. As I am labelling lots (hopefully
this will reduce in the future) am am consuming the consumable at a
great rate of knots, at £11.99 a time (Maplin is the cheapest I can
find) it soon adds up.

--
Residing on low ground in North Staffordshire

On Fri, 07 Oct 2011 11:56:11 +0100, Moonraker
wrote:

pruned

Thanks for the information Janet, but if I cannot write legibly with a
pen what chance have I with and engraver. As Chris suggested the profit
is certainly with the consumables. As I am labelling lots (hopefully
this will reduce in the future) am am consuming the consumable at a
great rate of knots, at £11.99 a time (Maplin is the cheapest I can
find) it soon adds up.

What size tape are you using? If Maplin's online prices are plus VAT
you might like to look at Labelzone
(http://www.labelzone.co.uk/tz-tape/c32)
where the 6, 9 and 12mm tapes are under a tenner plus VAT, for some if
not all colours, and there's no delivery charge.

One mistake I made early on was not reading the "manual" properly and
if I wanted 6 prints of a label I printed single labels 6 times before
finding the multi-print function that will do up to 9 in one go and
save you anything up to an inch of tape for each label, you just need
a pair of scissors.

Another trick with long names is to go for the wider tapes and two
lines of print - it works out a lot cheaper.


Cheers, Jake
================================================== ==========
URGling from the less wet end of Swansea Bay where it's ....
wet!

www.rivendell.org.uk

On Oct 7, 1:02*pm, Jake Nospam@invalid wrote:
On Fri, 07 Oct 2011 11:56:11 +0100, Moonraker
wrote:

pruned



Thanks for the information Janet, but if I cannot write legibly with a
pen what chance have I with and engraver. As Chris suggested the profit
is certainly with the consumables. As I am labelling lots (hopefully
this will reduce in the future) am am consuming the consumable at a
great rate of knots, at 11.99 a time (Maplin is the cheapest I can
find) it soon adds up.

What size tape are you using? If Maplin's online prices are plus VAT
you might like to look at Labelzone
(http://www.labelzone.co.uk/tz-tape/c32)
where the 6, 9 and 12mm tapes are under a tenner plus VAT, for some if
not all colours, and there's no delivery charge.

One mistake I made early on was not reading the "manual" properly and
if I wanted 6 prints of a label I printed single labels 6 times before
finding the multi-print function that will do up to 9 in one go and
save you anything up to an inch of tape for each label, you just need
a pair of scissors.

Another trick with long names is to go for the wider tapes and two
lines of print - it works out a lot cheaper.

Cheers, Jake
================================================== ==========
URGling from the less wet end of Swansea Bay where it's ....
wet!

www.rivendell.org.uk

I'll ask a stupid question
Why do you want to label your plants?
is it so that you can see at a glance what a plant is called, or is it
to keep a record of what you have?
If the latter, then why not keep a list on your computer and just put
a numbered label in with the plant, remembering to keep a back up list
on a memory stick or something, of post it to a hotmail account so
that if your machine goes down you don't loose your list.
David

"Janet" wrote in message
...
In article , says...

On 04/10/2011 18:44, Bob Hobden wrote:
"Moonraker" wrote

My writing is appalling, I can barely read it myself next day! I have
been thinking of getting one of these labelling machines which will
produce clear labels which I can stick to the plastic 15mm wide stick
in plastic labels I use. Brother PT1005BTS and GL-200 seem suitable
for this, though what the difference is between them I am not sure.
Has anyone any experience of these, good or bad, or perhaps can
recommend a better product.

We use a Brother GL-100 for labels in our garden and out on the
allotment. They last years, actually none have shown any problems. Great
product and much better than the old Dymo tape where the machines broke
on a regular basis.
Thanks for the tips, your are absolutely spot on Derek, I got this reply
from an email query to Brother:
"The PT-1005 and the GL-200 are basically the same machine, just sold
into different markets.

The PT machine is aimed at office or home users, and the GL machine is
aimed at the gardening market (GL standing for Garden Labeller)

For example you will find the GL-200 for sale in garden centres, and the
other model in stationary stores etc.

They print the same, and take the same tapes, so basically buy which
ever machine is available the cheapest!

Found the PT1005BTS the cheapest,and at Maplin the cheapest offer, Just
purchased and now trying to get to grips with operating it!


Some of have discussed before, making permanent name tags for special
plants/trees using an electric engraver machine and an aluminium tag.

If you're still looking for one, Lidl supermarket' s latest letterbox
flyer arrived today and among the gadgets, they're selling an engraver
similar to mine ..£9.99

Janet.

Does your engraving have to be free-hand or can you use some sort of
stencil?
I had a small label of this type made for me by a local professional. It was
a small memorial for my Labrador . The label was about 4" x 2" and cost £15
..

Bill

In article ,
says...

"Janet" wrote in message
...
Some of have discussed before, making permanent name tags for special
plants/trees using an electric engraver machine and an aluminium tag.

If you're still looking for one, Lidl supermarket' s latest letterbox
flyer arrived today and among the gadgets, they're selling an engraver
similar to mine ..£9.99

Janet.

Does your engraving have to be free-hand or can you use some sort of
stencil?
I had a small label of this type made for me by a local professional. It was
a small memorial for my Labrador . The label was about 4" x 2" and cost £15

Er, this is a very old thread!

I find it best to write on the aluminium label in pencil first,
then use that as a guide for the stylus.

I think you can get some kind of metal stencil to write through but
haven't used one.

Janet.

"Janet" wrote in message
...
In article ,
says...

"Janet" wrote in message
...
Some of have discussed before, making permanent name tags for special
plants/trees using an electric engraver machine and an aluminium tag.

If you're still looking for one, Lidl supermarket' s latest letterbox
flyer arrived today and among the gadgets, they're selling an engraver
similar to mine ..£9.99

Janet.

Does your engraving have to be free-hand or can you use some sort of
stencil?
I had a small label of this type made for me by a local professional. It
was
a small memorial for my Labrador . The label was about 4" x 2" and cost
£15

Er, this is a very old thread!

I find it best to write on the aluminium label in pencil first,
then use that as a guide for the stylus.

I think you can get some kind of metal stencil to write through but
haven't used one.

Janet.

Sorry Janet! I made the mistake of scrolling back through my postings and
got carried away a bit .
I found the thread with one or two unread postings. You'rs caught my eye
and the rest is history.
I never though about checking the date.

Thanks for your informative reply though

Bill