Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Sheen flame guns: question
Hello all
I have just inherited a very old Sheen brand paraffin flame gun with a hood and wheels. No instruction manual of course but I relied on my Boy Scout prowess with a Primus stove. It seems that you have to heat the paraffin filled coil with the fuel soaked asbestos wick until it reaches a suitable working temperature. After filling it with paraffin and soaking the wick with fuel I lit it and pumped it up to 20psi with the fuel valve shut. When it started roaring away. I opened the fuel valve and started to burn a patch of weedy ground . However after about 20 minutes it "goes out " and a huge cloud of unburnt vapour pours out. I have taken out the nozzle and cleaned it out but it continues to go out after 20 minutes. The pressure is kept around the 20psi mark .Should it be higher or lower ? Has anyone any suggestions as to why it works ok just for short periods ? -- Martin please remove spam trap when replying |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sheen Flame Gun Spares | United Kingdom | |||
Sheen flame gun | United Kingdom | |||
sheen x300 flame gun | United Kingdom | |||
flame guns | United Kingdom | |||
Sheen flame weed gun | United Kingdom |