#1   Report Post  
Old 13-02-2004, 01:29 PM
hillier
 
Posts: n/a
Default lifting paving slab

My patio is made up with 2ft slabs on a dry mix of sand and cement. One of
the slabs has dropped slightly at one end.
Is there a way to lift and build up the slab without a major operation or
damaging the slabs.


  #2   Report Post  
Old 13-02-2004, 03:27 PM
Neil
 
Posts: n/a
Default lifting paving slab

"hillier" wrote in message
...
My patio is made up with 2ft slabs on a dry mix of sand and cement. One of
the slabs has dropped slightly at one end.
Is there a way to lift and build up the slab without a major operation or
damaging the slabs.


If the slab is away from an open edge it can be lifted. Is the patio
pointed or butt joined? If pointed, rake out the joints all round and
leaver the slab upward using flat leavers (tough paint scrapers, cold
chisels etc). If the patio is butt jointed it is not so easy. Your local
hire centre will have a special lifter available. It was designed by an
Irishman and uses fine points to grip the slab. The guys there will give
you instructions.
Hope that helps,
Neil Faulkner
www.conceptgardens.com


  #3   Report Post  
Old 13-02-2004, 09:01 PM
Jaques d'Alltrades
 
Posts: n/a
Default lifting paving slab

The message
from "hillier" contains these words:

My patio is made up with 2ft slabs on a dry mix of sand and cement. One of
the slabs has dropped slightly at one end.
Is there a way to lift and build up the slab without a major operation or
damaging the slabs.


Little pile of fine sand on the low bit. Lift carefully with the corner
of a spade, or similar. When level, wash sand into cracks with a small
watering can or similar.

--
Rusty
Open the creaking gate to make a horrid.squeak, then lower the foobar.
http://www.users.zetnet.co.uk/hi-fi/
  #4   Report Post  
Old 13-02-2004, 09:40 PM
Jaques d'Alltrades
 
Posts: n/a
Default lifting paving slab

The message
from "hillier" contains these words:

My patio is made up with 2ft slabs on a dry mix of sand and cement. One of
the slabs has dropped slightly at one end.
Is there a way to lift and build up the slab without a major operation or
damaging the slabs.


Little pile of fine sand on the low bit. Lift carefully with the corner
of a spade, or similar. When level, wash sand into cracks with a small
watering can or similar.

--
Rusty
Open the creaking gate to make a horrid.squeak, then lower the foobar.
http://www.users.zetnet.co.uk/hi-fi/
  #5   Report Post  
Old 13-02-2004, 09:40 PM
Jaques d'Alltrades
 
Posts: n/a
Default lifting paving slab

The message
from "hillier" contains these words:

My patio is made up with 2ft slabs on a dry mix of sand and cement. One of
the slabs has dropped slightly at one end.
Is there a way to lift and build up the slab without a major operation or
damaging the slabs.


Little pile of fine sand on the low bit. Lift carefully with the corner
of a spade, or similar. When level, wash sand into cracks with a small
watering can or similar.

--
Rusty
Open the creaking gate to make a horrid.squeak, then lower the foobar.
http://www.users.zetnet.co.uk/hi-fi/
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Small paving slab source Bob Minchin United Kingdom 10 06-05-2009 02:26 PM
Question for Ray: slab to S/H dd Orchids 6 03-09-2004 05:02 PM
Concrete slab dip Dave Lawns 4 25-07-2004 11:02 AM
Plants growing through the floor slab Louise United Kingdom 3 09-08-2003 03:13 PM
Need help with slab for my return to pond John Hines Ponds 0 21-05-2003 06:20 PM


All times are GMT +1. The time now is 01:50 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 GardenBanter.co.uk.
The comments are property of their posters.
 

About Us

"It's about Gardening"

 

Copyright © 2017