Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Lawn mower edger help Please
So I have a regular push lawnmower. The only way i can get the lawn mower
to start is to directly syphon gas out with a hose and put a few drops in the carburator. Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The lawn mower service people charge to much.,. Thanks Please post towards group.not my valid email. Phillip |
#2
|
|||
|
|||
Lawn mower edger help Please
asdfa said:
So I have a regular push lawnmower. Brand? Model? The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Has it been sitting all winter with gas in it? Has the gas been sitting in a can all winter, waiting to be used (even a portion of it)? Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. What did you try, to fix it? Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. Again, is the gas old? How long since you've changed the spark plug, or cleaned/regapped it? How long since you've cleaned/replaced/reoiled the air filter? Gas filter? I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The information you've given is pretty vague. I'm not so sure I know what you mean by a "regular lawnmower". There are literally hundreds of push mowers, and dozens of engine manufacturers for them. Some have priming bulbs for cold starting, some have manual chokes, and some have both. Most edgers that I've had are two stroke. Is yours, not? The lawn mower service people charge to much.,. More than a new one? I doubt it. There's nothing wrong with taking it to a shop, once a year, to get it ready to go for the season. Especially if you don't really know what you're doing, as far as maintainence goes. Thanks Please post towards group. Good. That's kinda the way the USENET works. not my valid email. Most aren't, save for fools. -- Eggs Can atheists get insurance for acts of God? |
#3
|
|||
|
|||
Lawn mower edger help Please
Thanks for a reply,
So the lawn mower has a primer bulb, but as far as I remember it never had worked -- you would squeeze the bulb and find that it had no resistance...no gas being sucked in. I took apart the carburator and cleaned it well. But the lawn mower will only start like I said once one puts a few drops in the carburator with the valve open.. then it will die. As for the edger the gas did sit inside the edger for a few months, then i replaced it with fresh gas about a week ago. The spark plug is new on the edger the air filter is clean, it has no primer bulb. And once again when i put gas straight into the carburator with the manual choke open it starts and then dies. They are both Briggs n Stratton Hope this help a little more. "Eggs Zachtly" wrote in message ... asdfa said: So I have a regular push lawnmower. Brand? Model? The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Has it been sitting all winter with gas in it? Has the gas been sitting in a can all winter, waiting to be used (even a portion of it)? Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. What did you try, to fix it? Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. Again, is the gas old? How long since you've changed the spark plug, or cleaned/regapped it? How long since you've cleaned/replaced/reoiled the air filter? Gas filter? I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The information you've given is pretty vague. I'm not so sure I know what you mean by a "regular lawnmower". There are literally hundreds of push mowers, and dozens of engine manufacturers for them. Some have priming bulbs for cold starting, some have manual chokes, and some have both. Most edgers that I've had are two stroke. Is yours, not? The lawn mower service people charge to much.,. More than a new one? I doubt it. There's nothing wrong with taking it to a shop, once a year, to get it ready to go for the season. Especially if you don't really know what you're doing, as far as maintainence goes. Thanks Please post towards group. Good. That's kinda the way the USENET works. not my valid email. Most aren't, save for fools. -- Eggs Can atheists get insurance for acts of God? |
#4
|
|||
|
|||
Lawn mower edger help Please
[top-posting fixed]
asdfa said: "Eggs Zachtly" wrote in message ... asdfa said: So I have a regular push lawnmower. Brand? Model? The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Has it been sitting all winter with gas in it? Has the gas been sitting in a can all winter, waiting to be used (even a portion of it)? Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. What did you try, to fix it? Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. Again, is the gas old? How long since you've changed the spark plug, or cleaned/regapped it? How long since you've cleaned/replaced/reoiled the air filter? Gas filter? I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The information you've given is pretty vague. I'm not so sure I know what you mean by a "regular lawnmower". There are literally hundreds of push mowers, and dozens of engine manufacturers for them. Some have priming bulbs for cold starting, some have manual chokes, and some have both. Most edgers that I've had are two stroke. Is yours, not? The lawn mower service people charge to much.,. More than a new one? I doubt it. There's nothing wrong with taking it to a shop, once a year, to get it ready to go for the season. Especially if you don't really know what you're doing, as far as maintainence goes. Thanks for a reply, So the lawn mower has a primer bulb, but as far as I remember it never had worked -- you would squeeze the bulb and find that it had no resistance...no gas being sucked in. How many times does the manual say to pump the primer? I took apart the carburator and cleaned it well. Therein may lie the problem. Did you remove mixture screw? If so, did you properly seat it? ( screw it all the way in, then back it out x number of turn(s), as per the manufacturers suggestion? What did you clean it with? But the lawn mower will only start like I said once one puts a few drops in the carburator with the valve open.. then it will die. By "valve", I'm assuming you mean "choke"? If so, you need to cold start with the choke either fully or half closed (RTFM). As for the edger the gas did sit inside the edger for a few months, then i replaced it with fresh gas about a week ago. The gas in the edger may have begun to turn to varnish. This would gum up the needle valve, not allowing gas into the intake (or allowing enough fuel to provide the correct fuel-air ratio). The spark plug is new on the edger the air filter is clean, it has no primer bulb. And, it's a four cycle engine, on the edger? And once again when i put gas straight into the carburator with the manual choke open it starts and then dies. Again, you need to cold start with the choke closed. You need more fuel than air, momentarily, to cold start an engine. They are both Briggs n Stratton Hope this help a little more. Yes, but it still sounds as though you're not following correct cold-starting procedures. If you don't pour any gas directly into the carb, do you smell gas when you try and start the engine, as though it were flooding? You should probably take it to a local shop. It's still cheaper than purchasing a new one. -- Eggs -I went to a seafood disco rave last week.... and pulled a mussel. |
#5
|
|||
|
|||
maybe it is cheaper, but it is still very expensive. I cannot believe how much they are charging these days.
|
#6
|
|||
|
|||
Lawn mower edger help Please
On Mar 15, 1:47 pm, "asdfa" wrote:
So I have a regular push lawnmower. The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The lawn mower service people charge to much.,. Thanks Please post towards group.not my valid email. Phillip If it starts & runs with a few drops of gas in the carb, that eliminates everything except fuel starvation, meaning no fuel getting thru the carb. That is usually caused by a clogged fuel pickup screen in the tank, or a clogged jet in the carb. Both situations require pulling the carb, disassembly, and blowing it out with carb cleaner. Then you need to put it back together with a new carb kit. (gaskets & fuel "pump"). It sounds like you are not taking care of your machines at the end of the cutting season. NEVER let fuel remain in the tank/carb over the winter without a fuel stabilizer added to the gas. Otherwise you get the problem you have described for both units. BTW, the primer bulb does crack & is cheap & replaceable. Bob S. Bob |
#7
|
|||
|
|||
Lawn mower edger help Please
"Bob" wrote in message ups.com... On Mar 15, 1:47 pm, "asdfa" wrote: So I have a regular push lawnmower. The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The lawn mower service people charge to much.,. Thanks Please post towards group.not my valid email. Phillip If it starts & runs with a few drops of gas in the carb, that eliminates everything except fuel starvation, meaning no fuel getting thru the carb. That is usually caused by a clogged fuel pickup screen in the tank, or a clogged jet in the carb. Both situations require pulling the carb, disassembly, and blowing it out with carb cleaner. Then you need to put it back together with a new carb kit. (gaskets & fuel "pump"). It sounds like you are not taking care of your machines at the end of the cutting season. NEVER let fuel remain in the tank/carb over the winter without a fuel stabilizer added to the gas. Otherwise you get the problem you have described for both units. BTW, the primer bulb does crack & is cheap & replaceable. Bob S. Bob ______________________________________________ I agree it is probably a fuel problem, but may not require a carb overhaul. I'd get a can of carb cleaner and a can of starter (Either) fluid from any auto parts store. Spray some carb cleaner in the carb air intake & pull engine starter a few time. Then I'd squirt a very little starter fluid in the intake and try to start it. If you can get the engine running for more than a few seconds, keep spraying in a bit of carb' cleaner. This may take care of the carb problem (if that's what it is) as well as disolving some gunk on the valves. Another Bob |
#8
|
|||
|
|||
Lawn mower edger help Please
On Mar 19, 3:46 am, "Bob" wrote:
"Bob" wrote in message ups.com... On Mar 15, 1:47 pm, "asdfa" wrote: So I have a regular push lawnmower. The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The lawn mower service people charge to much.,. Thanks Please post towards group.not my valid email. Phillip If it starts & runs with a few drops of gas in the carb, that eliminates everything except fuel starvation, meaning no fuel getting thru the carb. That is usually caused by a clogged fuel pickup screen in the tank, or a clogged jet in the carb. Both situations require pulling the carb, disassembly, and blowing it out with carb cleaner. Then you need to put it back together with a new carb kit. (gaskets & fuel "pump"). It sounds like you are not taking care of your machines at the end of the cutting season. NEVER let fuel remain in the tank/carb over the winter without a fuel stabilizer added to the gas. Otherwise you get the problem you have described for both units. BTW, the primer bulb does crack & is cheap & replaceable. Bob S. Bob ______________________________________________ I agree it is probably a fuel problem, but may not require a carb overhaul. I'd get a can of carb cleaner and a can of starter (Either) fluid from any auto parts store. Spray some carb cleaner in the carb air intake & pull engine starter a few time. Then I'd squirt a very little starter fluid in the intake and try to start it. If you can get the engine running for more than a few seconds, keep spraying in a bit of carb' cleaner. This may take care of the carb problem (if that's what it is) as well as disolving some gunk on the valves. Another Bob Always worth a try. But that is not getting the carb cleaner where it's supposed to be. Spraying the air intake is putting the carb cleaner directly into the engine rather than running it thru the carb. Does nothing for varnish buildup in the fuel supply portion of the carb. Bob S. |
#9
|
|||
|
|||
Lawn mower edger help Please
Group,
So I took apart the carburator and the engine gave it all a good cleaning and greasing (where needed) and got the edger to work Finally. So I decided to take apart the lawn mower (craftsman 6.0 w/briggs and s motor) I gave it all a good cleaning and greasing again where needed. But the lawn mower still wont turn on. A few messages up I saw that the valve had to be closed for the lawnmower to start. I think this is what the problem is with the lawn mower the valve stays open. I must have forgotten where the spring goes to control the opening and closing of the valve or I am missing another spring. If anyone has a lawnmower like mine model 917 387500 could you take a picture of the spring apparatus just on top of the carburator. I've seen other models from craftsman at the local sears that look like mine and look like they would have the same components so a general picture would do., Thanks Phillip "Bob" wrote in message oups.com... On Mar 19, 3:46 am, "Bob" wrote: "Bob" wrote in message ups.com... On Mar 15, 1:47 pm, "asdfa" wrote: So I have a regular push lawnmower. The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The lawn mower service people charge to much.,. Thanks Please post towards group.not my valid email. Phillip If it starts & runs with a few drops of gas in the carb, that eliminates everything except fuel starvation, meaning no fuel getting thru the carb. That is usually caused by a clogged fuel pickup screen in the tank, or a clogged jet in the carb. Both situations require pulling the carb, disassembly, and blowing it out with carb cleaner. Then you need to put it back together with a new carb kit. (gaskets & fuel "pump"). It sounds like you are not taking care of your machines at the end of the cutting season. NEVER let fuel remain in the tank/carb over the winter without a fuel stabilizer added to the gas. Otherwise you get the problem you have described for both units. BTW, the primer bulb does crack & is cheap & replaceable. Bob S. Bob ______________________________________________ I agree it is probably a fuel problem, but may not require a carb overhaul. I'd get a can of carb cleaner and a can of starter (Either) fluid from any auto parts store. Spray some carb cleaner in the carb air intake & pull engine starter a few time. Then I'd squirt a very little starter fluid in the intake and try to start it. If you can get the engine running for more than a few seconds, keep spraying in a bit of carb' cleaner. This may take care of the carb problem (if that's what it is) as well as disolving some gunk on the valves. Another Bob Always worth a try. But that is not getting the carb cleaner where it's supposed to be. Spraying the air intake is putting the carb cleaner directly into the engine rather than running it thru the carb. Does nothing for varnish buildup in the fuel supply portion of the carb. Bob S. |
#10
|
|||
|
|||
Lawn mower edger help Please
asdfa wrote:
Group, So I took apart the carburator and the engine gave it all a good cleaning and greasing (where needed) and got the edger to work Finally. So I decided to take apart the lawn mower (craftsman 6.0 w/briggs and s motor) I gave it all a good cleaning and greasing again where needed. But the lawn mower still wont turn on. A few messages up I saw that the valve had to be closed for the lawnmower to start. I think this is what the problem is with the lawn mower the valve stays open. I must have forgotten where the spring goes to control the opening and closing of the valve or I am missing another spring. If anyone has a lawnmower like mine model 917 387500 could you take a picture of the spring apparatus just on top of the carburator. I've seen other models from craftsman at the local sears that look like mine and look like they would have the same components so a general picture would do., Thanks Phillip "Bob" wrote in message oups.com... On Mar 19, 3:46 am, "Bob" wrote: "Bob" wrote in message ups.com... On Mar 15, 1:47 pm, "asdfa" wrote: So I have a regular push lawnmower. The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The lawn mower service people charge to much.,. Thanks Please post towards group.not my valid email. Phillip If it starts & runs with a few drops of gas in the carb, that eliminates everything except fuel starvation, meaning no fuel getting thru the carb. That is usually caused by a clogged fuel pickup screen in the tank, or a clogged jet in the carb. Both situations require pulling the carb, disassembly, and blowing it out with carb cleaner. Then you need to put it back together with a new carb kit. (gaskets & fuel "pump"). It sounds like you are not taking care of your machines at the end of the cutting season. NEVER let fuel remain in the tank/carb over the winter without a fuel stabilizer added to the gas. Otherwise you get the problem you have described for both units. BTW, the primer bulb does crack & is cheap & replaceable. Bob S. Bob ______________________________________________ I agree it is probably a fuel problem, but may not require a carb overhaul. I'd get a can of carb cleaner and a can of starter (Either) fluid from any auto parts store. Spray some carb cleaner in the carb air intake & pull engine starter a few time. Then I'd squirt a very little starter fluid in the intake and try to start it. If you can get the engine running for more than a few seconds, keep spraying in a bit of carb' cleaner. This may take care of the carb problem (if that's what it is) as well as disolving some gunk on the valves. Another Bob Always worth a try. But that is not getting the carb cleaner where it's supposed to be. Spraying the air intake is putting the carb cleaner directly into the engine rather than running it thru the carb. Does nothing for varnish buildup in the fuel supply portion of the carb. Bob S. Try finding it at http://www3.sears.com/ |
#11
|
|||
|
|||
Lawn mower edger help Please
asdfa wrote:
Group, So I took apart the carburator and the engine gave it all a good cleaning and greasing (where needed) and got the edger to work Finally. So I decided to take apart the lawn mower (craftsman 6.0 w/briggs and s motor) I gave it all a good cleaning and greasing again where needed. But the lawn mower still wont turn on. A few messages up I saw that the valve had to be closed for the lawnmower to start. I think this is what the problem is with the lawn mower the valve stays open. I must have forgotten where the spring goes to control the opening and closing of the valve or I am missing another spring. If anyone has a lawnmower like mine model 917 387500 could you take a picture of the spring apparatus just on top of the carburator. I've seen other models from craftsman at the local sears that look like mine and look like they would have the same components so a general picture would do., Thanks Phillip So go to Sears and take a picture of one yourself. You're the one that screwed it up. -- Art |
#12
|
|||
|
|||
Lawn mower edger help Please
Others have covered specific things to do/try/look for, so I won't
jump into those. But, I can recommend a good book published by Briggs and Stratton, available at Sears, Home Depot, and a lot of other places, called "Small Engine Repair". It was the best $20 I ever invested. It covers most common repairs and maintenance items on almost every kind of small engine around. It's written for most people who can identify which end of a screwdriver is which, and has enough pictures to help you figure out problems easily. It's saved my butt way more than once..... On Mar 15, 4:47 pm, "asdfa" wrote: So I have a regular push lawnmower. The only way i can get the lawn mower to start is to directly syphon gas out with a hose and put a few drops in the carburator. Then the mower will start for a few seconds until it drinks up the few drops of gas and it will dye. So I bought a new one because I couldnt fix it. Now my push edger is doing the same thing. It will only start when i directly put gas into the carburator and will run for a second or two until the gas it gone. I dont want to have to buy another edger just because of the SAME EXACT PROBLEM. HOW do i fix this? The lawn mower service people charge to much.,. Thanks Please post towards group.not my valid email. Phillip |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lawn Edger | United Kingdom | |||
Edging revisited... true edger vs. attachment edger | Lawns | |||
King O'Lawn edger | Lawns | |||
Lawn Edger | Lawns | |||
Lawn Edger | Australia |