Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
MagDrive pump is tripping GFI....time to replace?
It still seems to work fine. Without the pump plugged in, other items
plugged into this circuit work properly.... Thanks, Jay "Gale Pearce" wrote in message ... You may want to check your GFIC before replacing the pump - I had one go bad Gale :~) "Jay Adair" wrote in message ... After 2 years of perfect operation, my Magdrive pump just started tripping the GFI after 20 seconds of operation. Resetting the GFI and plugging the pump back in only gets another 20 seconds.... The intake opening of the pump is clear, but I haven't opened the case to check the impeller for blockage yet. Is this about normal life....time to replace the pump if impeller is clear? Thanks for any input, Jay |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing Another GFI Today | Ponds (moderated) | |||
RCD Tripping | Ponds (moderated) | |||
Water feature pump tripping ELCB | Ponds | |||
GFI is tripping--- | Ponds | |||
MagDrive pump is tripping GFI....time to replace? | Ponds |