#1   Report Post  
Old 18-07-2003, 10:16 AM
RedForeman
 
Posts: n/a
Default PCF from AH Supply

I have the 2x55 brite lite kit... it just occurred to me.... do I have 110
Watts? or just 55?? that's one socket, 2 long bulbs.... the more I think
about it, I can't figure whether I've got 55 or 110??? I think 110.....

110watts over a 29g is good...
55watts over a 29g isn't that great....

plants are growing great... but could be just dumb luck...

with CO2, PMDD, and that much light, it is growing pretty good.....


  #2   Report Post  
Old 18-07-2003, 10:16 AM
RedForeman
 
Posts: n/a
Default PCF from AH Supply

and to think, I've been thinking I only had 55w....

I could have had more plants.... I could have had LeighMo's plants too...
and I had to pass them up because we/I/she thought I only had 55w....
DOH!!!!!!!!!


"nikolay_kraltchev" wrote in message
m...
You got 110.
Each bulb is 55 watts.
The 2 bulbs that you see are hooked up to a single ballast. And there
is a single cord coming out of the ballast.

110 over a 29 is great.

Plus AHSupply carries only good quality tubes so you are all set.

--Nikolay



  #3   Report Post  
Old 18-07-2003, 10:16 AM
RedForeman
 
Posts: n/a
Default PCF from AH Supply

He said one socket, which means 55Watts.

He could have meant one ballast and just used the wrong terminology.

So, to clear it up, here is the one vital question: How many bulbs light
up when you turn on the power?

If two do and you bought the 2x55W system, then you have 110W. If only one
does, then you have 55W. The 2x55W system means they send you one ballast
that drives two 55W bulbs. They have other "2x" systems as well. I for
example have a 2x36W system.


This is confusing, in a way....

One ballast, and two lights, that plug into one square 4 pin socket. 1
socket, 4 pins, 2 light tubes...

I'm as confused as I thought I was.... or am.... or will be.... confused
that is....


  #4   Report Post  
Old 18-07-2003, 10:16 AM
cindy
 
Posts: n/a
Default PCF from AH Supply

You have 110 watts (2x55). I bought the same thing from ahsupply.com
in January. Works great.

Cindy
  #5   Report Post  
Old 18-07-2003, 10:16 AM
RedForeman
 
Posts: n/a
Default PCF from AH Supply

I think it is you who are making it more confusing that it needs to be. So
again, let's try to unconfuse this by going back to my very simple
question. When you plug it in, how many bulbs light up?

Just answer that, nothing more. You're getting yourself all confused on
the other terminology which is confusing everyone else in the process and
making this one very convulted thread on what should have been a very
simple question.


Tell me what I don't know, not what is already obvious...

what do you call a bulb??? What I see is two bulbs, but they are connected,
so that's one bulb.... see, I can be confusing and confused all at the same
time....





  #6   Report Post  
Old 18-07-2003, 10:16 AM
RedForeman
 
Posts: n/a
Default PCF from AH Supply

Great... That's what I was hoping.....

You have 110 watts (2x55). I bought the same thing from ahsupply.com
in January. Works great.

Cindy



  #7   Report Post  
Old 18-07-2003, 10:16 AM
RedForeman
 
Posts: n/a
Default PCF from AH Supply

I gave up and called Ken at AH Supply....

I'm a dumbass... I ordered the 1x55.... 1 twin bulb = 55watts....

I'm now standing in the corner with the dunce cap on.... no need to beat me
up anymore.....


How many reflectors do you have? If you have one, then you have 55
watts. If you have two you have 110 watts. I think you are confused
here. The bulbs each have two tubes, with a base that has four pins.
If you actually ordered a 2 x 55 watt kit then you should have two
sockets, two reflectors, and two bulbs for a total of four tubes. If
you still have the packing list then take a look at it. It's
possible, but not probable that Kim made a mistake in packing your
order. I have ordered from AH Supply four times and have never had a
problem.

I have the 2x55 brite lite kit... it just occurred to me.... do I have

110
Watts? or just 55?? that's one socket, 2 long bulbs.... the more I think
about it, I can't figure whether I've got 55 or 110??? I think 110.....

110watts over a 29g is good...
55watts over a 29g isn't that great....

plants are growing great... but could be just dumb luck...

with CO2, PMDD, and that much light, it is growing pretty good.....



Semper Fi!

Visit the forums at Aqua Botanic!
http://aquabotanicwetthumb.infopop.cc/#1

Need Nitrate or Potassium for your tank? Go to www.litemanu.com
(Just a happy customer of the above!)



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Co2 Supply Chris Freshwater Aquaria Plants 2 22-08-2003 12:07 PM
PCF from AH Supply RedForeman Freshwater Aquaria Plants 16 13-06-2003 01:44 PM
AH supply question...... Cannibul Freshwater Aquaria Plants 5 20-04-2003 06:14 AM
AH SUPPLY Enclosures TY Freshwater Aquaria Plants 6 20-04-2003 06:12 AM
Roofing Supply Companies BenignVanilla Ponds 12 19-04-2003 10:44 PM


All times are GMT +1. The time now is 09:55 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 GardenBanter.co.uk.
The comments are property of their posters.
 

About Us

"It's about Gardening"

 

Copyright © 2017