Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Sheen Flame Gun Spares
Can anyone please help with an address where I can obtain spare parts for an early Sheen X300 flame gun?
Thanks in anticipation - Steve |
#2
|
|||
|
|||
Sheen Flame Gun Spares
Quote:
(Hugh Prichard & Co Ltd, Nottingham - 0115 927 2321) |
#3
|
|||
|
|||
Sheen Flame Gun Spares
Quote:
http://www.mower-magic.co.uk/acatalog/FLAME_GUN.html They have everything you could need! |
#4
|
|||
|
|||
Sheen Flame Gun Spares
Quote:
|
#5
|
|||
|
|||
Sheen Flame Gun Spares
The message m
from designer13 contains these words: Steve wrote: *Can anyone please help with an address where I can obtain spare parts for an early Sheen X300 flame gun? Thanks in anticipation - Steve * Despite LOTS of pumping I am unable to get any pressure into the tank of my early Sheen Flame Gun - I presume that it may be the piston seal that is failing - although it looks OK - does anyone have any ideas? Thanks. Depends what you call lots of pumping..mine needs 40 pushes to reach starting pressure, before attempting ignition. Are you sure the fuel tank screw cap seals properly, and the control to the burner is fully closed? Janet. |
#6
|
|||
|
|||
Sheen Flame Gun Spares
In article , Janet
Baraclough.. writes Depends what you call lots of pumping..mine needs 40 pushes to reach starting pressure, before attempting ignition. So did mine, janet so I gave up a couple of weeks ago, I only wanted to burn some weeds from the patio paving, and I put an extension on my hot air gun and whipped over the lot in no time janet -- Janet Tweedy Dalmatian Telegraph http://www.lancedal.demon.co.uk |
#7
|
|||
|
|||
Sheen Flame Gun Spares
In article , Janet
Baraclough.. writes Depends what you call lots of pumping..mine needs 40 pushes to reach starting pressure, before attempting ignition. So did mine, janet so I gave up a couple of weeks ago, I only wanted to burn some weeds from the patio paving, and I put an extension on my hot air gun and whipped over the lot in no time janet -- Janet Tweedy Dalmatian Telegraph http://www.lancedal.demon.co.uk |
#8
|
|||
|
|||
Sheen Flame Gun Spares
On Tuesday, 17 February 2004 19:59:02 UTC, designer13 wrote:
Steve wrote: *Can anyone please help with an address where I can obtain spare parts for an early Sheen X300 flame gun? Thanks in anticipation - Steve * Despite LOTS of pumping I am unable to get any pressure into the tank of my early Sheen Flame Gun - I presume that it may be the piston seal that is failing - although it looks OK - does anyone have any ideas? Thanks. -- designer13 ------------------------------------------------------------------------ posted via www.GardenBanter.co.uk Hello I think you need a NON RETURN VALVE I had to by one and the tool to replaceit with ...ebay or Amazon 10 quid |
#10
|
|||
|
|||
Sheen Flame Gun Spares
On 30/06/2017 15:19, Chris Hogg wrote:
uk.d-i-y regularly gets replies to messages posted decades ago on DIYbanter, from people who don't look at the dates. I hope the same isn't going to start happening here! Blame Google Groups. On all the usenet groups I frequent, these posts almost invariably come from " The Google groups search facility comes up with relevant posts when asked a question, but it makes it very hard to work out when they were posted. -- Tciao for Now! John. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sheen flame gun | United Kingdom | |||
sheen x300 flame gun | United Kingdom | |||
Sheen flame weed gun | United Kingdom | |||
Paraffin flame gun? | United Kingdom | |||
Sheen flame guns: question | United Kingdom |