Home |
Search |
Today's Posts |
#16
|
|||
|
|||
How do I remove and replace the lawnmower blade?
there is. use an impact wrench. that means having a compressor. oh
well, you asked! dave "Brigitte J." wrote: When I try to turn the bolt, the blade turns with it. I'm sure there's a simple way, but I haven't figured it out. All help/advice is appreciated. Thanks, Brigitte |
#17
|
|||
|
|||
How do I remove and replace the lawnmower blade?
iBuyMinis wrote:
Correct me if I'm wrong group but is it absolutely necessary to torque the nut down? Won't the spinning of the crank torque the blade? thats lazy and insane and asking to get their toe(s) chopped off |
#18
|
|||
|
|||
How do I remove and replace the lawnmower blade?
Who's going to sit there and figure out that a 180 lb man standing (?) on
the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Do you know the formula to determine that you'll have to stand on the breaker bar at 10" from the center of the nut? It's not rocket science, but neither is changing a lawn mower blade. If you need to, rent/buy a torque wrench. "Ermalina" wrote in message ... iBuyMinis wrote: Taking off the blade is easy, it's torquing it down to ensure that it does not fly off is the difficult part. "torquing it down" difficult? 1. You know your weight in pounds. 2. You know the length of the wrench in feet. 3. You know the desired torque in foot-pounds. It's neither rocket science nor brain surgery. |
#19
|
|||
|
|||
How do I remove and replace the lawnmower blade?
Don't be a twit.
How come others got the gist of what I was asking but you are way out in left field? I never said for the nut not to be torque down, I was asking whether or not the spinning action of the crank will continue to torque the bolt down. You are the lazy one for not reading carefully before jumping to conclusion. "Die Spammer" wrote in message ... iBuyMinis wrote: Correct me if I'm wrong group but is it absolutely necessary to torque the nut down? Won't the spinning of the crank torque the blade? thats lazy and insane and asking to get their toe(s) chopped off |
#20
|
|||
|
|||
How do I remove and replace the lawnmower blade?
Okay:
(1) Turn mower sideways ensuring that carb is positioned correctly (2) Unplug spark plug cable (3) Buy and apply blade lock gadget (4) Buy or borrow air compressor from neighbor (5) Buy torque wrench Exactly how much will a shop charge to do the damn thing - lol. "John" wrote in message ... Who's going to sit there and figure out that a 180 lb man standing (?) on the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Do you know the formula to determine that you'll have to stand on the breaker bar at 10" from the center of the nut? It's not rocket science, but neither is changing a lawn mower blade. If you need to, rent/buy a torque wrench. "Ermalina" wrote in message ... iBuyMinis wrote: Taking off the blade is easy, it's torquing it down to ensure that it does not fly off is the difficult part. "torquing it down" difficult? 1. You know your weight in pounds. 2. You know the length of the wrench in feet. 3. You know the desired torque in foot-pounds. It's neither rocket science nor brain surgery. |
#21
|
|||
|
|||
How do I remove and replace the lawnmower blade?
John wrote:
Who's going to sit there and figure out that a 180 lb man standing (?) on the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Do you know the formula to determine that you'll have to stand on the breaker bar at 10" from the center of the nut? It's not rocket science, but neither is changing a lawn mower blade. If you need to, rent/buy a torque wrench. "Ermalina" wrote in message ... iBuyMinis wrote: Taking off the blade is easy, it's torquing it down to ensure that it does not fly off is the difficult part. "torquing it down" difficult? 1. You know your weight in pounds. 2. You know the length of the wrench in feet. 3. You know the desired torque in foot-pounds. It's neither rocket science nor brain surgery. A 180 pound man, standing at the end of a horizontally-oriented 2 foot breaker bar so that the force is applied vertically produces a torque of 360 ft-lbs (not 90). Technically, Torque = R X F, the crossproduct of the displacement and force vectors. So, as long as the force is applied at a 90 degree angle, the torque is simply the force multiplied by the distance from the pivot point. That's about as simple a "formula" as you can get. How hard is it to determine that if you want to produce a torque of 50 ft-lbs (the recommendation for my mower) that if you weigh 180 lbs, then apply your weight fully (stand or whatever) between 1/4 and 1/3 ft (3 or 4 inches) down the length of the breaker bar? No need for great precision. Like I said it's neither rocket science nor brain surgery. |
#22
|
|||
|
|||
How do I remove and replace the lawnmower blade?
"John" wrote in message ... Who's going to sit there and figure out that a 180 lb man standing (?) on the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Evidently you don't know math very well. There are books on the subject and they give many formulas to work with. You will get that 90# much closer than you state. Ed |
#23
|
|||
|
|||
How do I remove and replace the lawnmower blade?
"Edwin Pawlowski" wrote in message gy.com... "John" wrote in message ... Who's going to sit there and figure out that a 180 lb man standing (?) on the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Evidently you don't know math very well. There are books on the subject and they give many formulas to work with. You will get that 90# much closer than you state. Ed Or arithmatic. A 180lb man standing on 24" bar will produce 360 ftlbs of torque. |
#24
|
|||
|
|||
How do I remove and replace the lawnmower blade?
"nospam" wrote in message ... "Mike H" 1newsATstelliteDOTmailshellDOTcom wrote in message ... Remove the wire from the spark plug first. -- Mike H "Dave Balderstone" wrote in message ... In article , Brigitte J. wrote: When I try to turn the bolt, the blade turns with it. I'm sure there's a simple way, but I haven't figured it out. Hold the blade, then turn the bolt. If you can't hold the blade with a gloved hand, block it from turning with a scrap piece of wood. djb -- "I'll do the stupid thing first and then you shy people follow..." - Frank Zappa Yes, for God's sake disconnect that spark plug! Somehow I was also wondering if that nut might be left-handed. I have a Murray gas mower that I was going to pull the blade from and sharpen/balance the blade. No, not likely. Lawnmowers blades are all made to "tighten" the bolt if they slip any. Otherwise, the motor torque could possibly spin the retaining bolt loose. James... |
#25
|
|||
|
|||
How do I remove and replace the lawnmower blade?
"Brigitte J." wrote in message ... When I try to turn the bolt, the blade turns with it. I'm sure there's a simple way, but I haven't figured it out. All help/advice is appreciated. Thanks, Brigitte Buy and air compressor. Doesn't have to be a 7 HP monster, in fact, a 1 HP with a 20 gallon tank has served me well for 25 years now. (Used for everything from blowing dust off the lawnmower, to blowing up kids swimming pools to airing up automobile tires, an air compressor is not indispensable to a home owner, but it's towards the top of the list.) Buy a 1/2" drive impact wrench and a cheap set of impact sockets. (Go cheap unless you think you're going in the tire changing business). Turn the mower on it's side. I'd disconnect the spark plug, but I'm a worry worth. I've never seen a mower fire without the deadman's switch engaged. Dribble some penetrating oil on the bolt head. Wait 15 minutes. !Bet that impact wrench will spin off that bolt in less than two seconds. That's how they take them off in the lawnmower shops. BTW, if the blade is REALLY beat up, buy a new one. They don't cost that much. I always balance my blades. I don't think it's necessary to balance a blade, but it seems to reduce vibration. They sell a cheap (a couple of bucks) little item in the auto parts store that works fine for balancing mower blades. (My mower deck has three blades, and it really helps with them) James...... |
#26
|
|||
|
|||
How do I remove and replace the lawnmower blade?
My bad. Forgot to state "at 1 ft."
"Ermalina" wrote in message ... John wrote: Who's going to sit there and figure out that a 180 lb man standing (?) on the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Do you know the formula to determine that you'll have to stand on the breaker bar at 10" from the center of the nut? It's not rocket science, but neither is changing a lawn mower blade. If you need to, rent/buy a torque wrench. "Ermalina" wrote in message ... iBuyMinis wrote: Taking off the blade is easy, it's torquing it down to ensure that it does not fly off is the difficult part. "torquing it down" difficult? 1. You know your weight in pounds. 2. You know the length of the wrench in feet. 3. You know the desired torque in foot-pounds. It's neither rocket science nor brain surgery. A 180 pound man, standing at the end of a horizontally-oriented 2 foot breaker bar so that the force is applied vertically produces a torque of 360 ft-lbs (not 90). Technically, Torque = R X F, the crossproduct of the displacement and force vectors. So, as long as the force is applied at a 90 degree angle, the torque is simply the force multiplied by the distance from the pivot point. That's about as simple a "formula" as you can get. How hard is it to determine that if you want to produce a torque of 50 ft-lbs (the recommendation for my mower) that if you weigh 180 lbs, then apply your weight fully (stand or whatever) between 1/4 and 1/3 ft (3 or 4 inches) down the length of the breaker bar? No need for great precision. Like I said it's neither rocket science nor brain surgery. |
#27
|
|||
|
|||
How do I remove and replace the lawnmower blade?
Again, my bad. I forgot to add "at 1 ft." My physics degree kinda went out
of the window when I joined management. :-) "Chas Hurst" wrote in message ... "Edwin Pawlowski" wrote in message gy.com... "John" wrote in message ... Who's going to sit there and figure out that a 180 lb man standing (?) on the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Evidently you don't know math very well. There are books on the subject and they give many formulas to work with. You will get that 90# much closer than you state. Ed Or arithmatic. A 180lb man standing on 24" bar will produce 360 ftlbs of torque. |
#28
|
|||
|
|||
How do I remove and replace the lawnmower blade?
In article , miller.john@charter-
ihatespam-.net says... Again, my bad. I forgot to add "at 1 ft." My physics degree kinda went out of the window when I joined management. :-) That degree is still out there. ;-) A 180 lb man standing on the bar 6 inches from the nut would produce 90 lb. ft. of torque. Rick "Chas Hurst" wrote in message ... "Edwin Pawlowski" wrote in message gy.com... "John" wrote in message ... Who's going to sit there and figure out that a 180 lb man standing (?) on the end of a 24" breaker bar will deliver 90 ft/lbs of torque? What if you needed only 75 ft/lbs? Evidently you don't know math very well. There are books on the subject and they give many formulas to work with. You will get that 90# much closer than you state. Ed Or arithmatic. A 180lb man standing on 24" bar will produce 360 ftlbs of torque. |
#29
|
|||
|
|||
How do I remove and replace the lawnmower blade?
Disconnect the plug wire. Hold the blade with one hand and use the wrench
with the other. If it won't budge, try turning the other way, some are reverse threaded. Bob "Brigitte J." wrote in message ... When I try to turn the bolt, the blade turns with it. I'm sure there's a simple way, but I haven't figured it out. All help/advice is appreciated. Thanks, Brigitte |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
question about lawnmower blade noise | Lawns | |||
lawnmower blade | Lawns | |||
LawnMower Blade | Gardening | |||
riding lawnmower blade question | Lawns | |||
mower blade stuck.. Q: how to remove.. | Gardening |